Vintage Tube Amp

Ampeg Gemini VI Model GS-15-R. Made In Linden, NJ USA. Preamp: 7199, 12AX7, 6CG7, 12AX7. Speaker Codes: non-original 15. Original attached 2 button – Vibrato/Echo. Condition Description: VG – Amp is in very good condition, original with no modifications. Runs great, works 100%. Fully functional with no damages. All parts including 2-switch and foot pedal, power cord, and all tubes included. The Gemini VI GS-15-R was a continued evolution in the Gemini Series. It is a single channel version of the Gemini II, with tremolo and echo, also featuring a fixed-bias power section that bumped up the output to 30 watts. Originally intended for the accordion and guitar, it found popularity among guitarists. This was called an “Ultra High Switch” it serves as a “bright” switch. Like other Gemini amps, this GS-15-R features the famed Baxandall type treble and bass circuits that both “boost” and “cut”, bass and treble, not just “cut”. The cabinet is divided between the power section and the speaker section, allowing the speaker portion to be fine-tuned with a smaller “port” type of opening in the back panel, while still allowing the upper “power section” to be more open and provide better cooling. The traditional Blue Diamond Tolex covering and brown grille complete the classic Ampeg styling. The item “Ampeg Gemini VI Model GS-15-R Guitar Amplifier Vintage 60s Tube Amp Analog USA” is in sale since Friday, October 30, 2020. This item is in the category “Musical Instruments & Gear\Guitars & Basses\Guitar Amplifiers”. The seller is “counterhoop” and is located in Reed City, Michigan. This item can be shipped worldwide.

• Brand: Ampeg
• Amplifier Type: Stack
• Suitable For: Electric Guitar
• Power: 30 W
• MPN: Does Not Apply
• Model: Gemini VI
• Country/Region of Manufacture: United States

Mint Vintage Leslie TRIAD complete Matched Vaccum Tube Amp Power Supply & Filament Transformer Set. Runs on 117 Volt wall power. The Power Supply Transformer is set up to run a 4 Output Trafo load, so TONS of headroom! The primary is 9.3 k Ohms and the secondary is 16 Ohms. Very good High Fidelity output transformers, better than many output transformers used on Hi-Fi amplifiers. The frequency response is essentially flat (+/- 1 db) from 20 Hz to 60 kHz and they will make full power at 20 Hz. The transformer was also measured with an 8 Ohm load, the primary Impedance was 5K and the frequency response almost as good. Depending on your needs they can be used with either load impedance. They are in MINT physical condition with no rust or oxidation anywhere. The vinyl leads are about 3.5 long and in excellent shape, they are pliable and the colors are clear. The transformers are vertical mounting and fully enclosed. The dimensions are 2.625″ by 2.75″ across the end bells and 3.25″ tall, the mounting centers are 1.75″ by 1.75. The weight of each transformer is about 2.5 Pounds. These could be used to build a nice 15-20 Watt per channel High Fidelity amp. These transformers could be used with a number of small power tubes such as 7189, 6V6, 6BQ5, 6AQ5, 6BM8 and many others. Output from these filament transformers will beautifully power your EL84 PP, 6V6, 7189, or 6BQ5 projects. The power supply transformer measures width 3.75, depth 4.5 and height 3.75 and weighs around 7 Pounds. Theres a separate sale for another pair listed of Matched Leslie 100-12 with no power transformer if you wanted to use 4 outs for PPP configuration. The item “Vintage Leslie TRIAD Transformer SetEL84 Vacuum Tube AmpPower x1 & Filament x2″ is in sale since Sunday, April 19, 2020. This item is in the category “Consumer Electronics\Vintage Electronics\Vintage Audio & Video\Vintage Parts & Accessories\Vintage Transformers”. The seller is “vintagespeakerdude” and is located in Rogue River, Oregon. This item can be shipped worldwide.

• Brand: LESLIE
• Custom Bundle: No
• Modified Item: No
• Model: 100-11
• Country/Region of Manufacture: United States
• MPN: Does Not Apply