This listing includes a beautiful vintage Heathkit AA-121 stereo vacuum tube amplifier in exceptionally clean and electrically restored condition. Some of the work that was done to this amplifier includes: all of the tubes recently tested strong, the EL-34 / 6CA7 output tubes were matched and balanced, bad and out of spec capacitors were replaced, out of spec resistors were replaced, all solder joints have been inspected and any loose connections were re-soldered. As the photos show, the electrical work was done very well. As the photos also show, this vintage amp is very clean, inside and out, with only minor cosmetic wear. The original cage is also in fantastic shape. This amplifier has been well cared for over the years and there is virtually no corrosion anywhere on it. The power cord is in good condition and is not brittle. All of the lettering on the face and chassis is clear and easy to read. The two back feet, on the bottom of this amp, have been replaced with heavy-duty feet to better support the substantial weight of the three transformers. All of the tubes shown are included with this amp. Three of the El-34 tubes were made in Great Britain, and I believe them to be Mullards. I believe the fourth EL-34 tube is a vintage GE tube. Again, all of the tubes have recently tested strong and the output tubes are matched based on recent test results. This is a beautiful example of a vintage Heathkit tube amplifier in good working condition and it comes as shown in the photos. Own this vintage Heathkit AA-121 vacuum tube amplifier for a great price. The item “Vintage Heathkit AA-121 EL-34 6CA7 Stereo Tube Amplifier & Cage Restored & Clean” is in sale since Wednesday, December 15, 2021. This item is in the category “Consumer Electronics\Vintage Electronics\Vintage Audio & Video\Vintage Amplifiers & Tube Amps”. The seller is “spiritman68″ and is located in Milwaukee, Wisconsin. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Belgium, France, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Croatia, Malaysia, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Pakistan, Paraguay, Reunion, Uruguay.
This listing includes a beautiful vintage H. Scott 222C Stereomaster vacuum tube integrated laboratory amplifier in clean and electrically restored condition. This amplifier was restored approximately 6-months ago by the original owner. Some of the work that was done to this amplifier includes: testing all tubes and replacing any weak tubes, cleaned all controls and switches with DeOxit, replaced bad / out of spec capacitors, replaced any out of spec resistors, all solder joints have been inspected and any loose connections were re-soldered. After the restoration was complete, this amplifier was bench tested and it is in great working / sounding condition. As the photos show, this vintage amplifier is exceptionally clean inside and out and was well cared for and maintained over the years. The entire face still looks fantastic with clear lettering and all four corners are still sharp. All of the knobs are clean and in great shape. The original power cord is in good shape and is not brittle. All of the transformers and the chassis (inside and out) show only minimal wear and no corrosion. This is one of the cleanest Scott 222C amps that I have come across in a long time. Own this vintage H. Scott 222C vacuum tube stereo amplifier for a great price. The item “Vintage H. H. Scott 222C 6BQ5 Tube StereoMaster Lab Amplifier Clean & Restored” is in sale since Saturday, October 16, 2021. This item is in the category “Consumer Electronics\Vintage Electronics\Vintage Audio & Video\Vintage Stereo Receivers”. The seller is “spiritman68″ and is located in Milwaukee, Wisconsin. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Belgium, France, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Croatia, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Pakistan, Paraguay, Reunion, Uruguay.
Here we have a beautiful vintage Fender Pro Reverb amplifier from 1966. Made in the USA. The Pro Reverb is a 2×12 all tube guitar combo amplifier. It is essentially half of a “Twin Reverb” It is a 40 watt amplifier and it sounds so sweet. The beauty of the Pro Reverb is you can turn it up to 6 or 7 for a gig or recording and get that sweet spot. The amplifier is in very very clean condition. So please take a look at all the photos and if you have any questions feel free to ask. There is some light seem splitting at the corners but no major tears or rips. The amplifier has been re-capped and also has had a 3 prong plug added and the death cap removed. The speakers are the original Jensen C12′s. One dates to 1965 and one dates to 1964. The faceplate on this amp seems to be a pre- CBS as it says “Fender Electric Instrument Co”. Most likely it was a leftover faceplate when this amp was built in 1966. The transformers and chassis serial number all date to 1966. The original foot switch is included but one of the buttons is a bit fussy. It works but can be intermittent. The amp has had a recent check up by our amp technician and has been given a clean bill of health. Now for the sound… What can we say really… It is a vintage Pro Reverb and it sounds sweet to the ears. You can really juice this one up and get the beautiful breakup that we all crave. The reverb sounds great as most of the blackface amps do. The Vibrato is working great too. If you have any questions please feel free to ask and of course feel free to Make Us and Offer! Please note that this is out of our hands. Feel free to send a message if you have any questions. We are a full service music store in the Long Island, NY Area. The item “Fender Vintage Pro Reverb Blackface 1966 2×12 Guitar Tube Amplifier Very Clean” is in sale since Tuesday, August 17, 2021. This item is in the category “Musical Instruments & Gear\Vintage Musical Instruments\Vintage Guitars & Basses\Guitar Amplifiers”. The seller is “murphysmusic” and is located in Huntington Station, New York. This item can’t be shipped, the buyer must pick up the item.
This listing includes a beautiful vintage H. Scott 222 Stereomaster vacuum tube integrated amplifier in clean and electrically restored condition. This amplifier was restored approximately 6-months ago by the original owner. Some of the work that was done to this amplifier includes: testing all tubes and replacing any weak tubes, replacing and balancing the four 6BQ5 output tubes, replaced the rectifier tube with a new 5AR4 tube, cleaned all controls and switches with DeOxit, replaced bad / out of spec capacitors, replaced any out of spec resistors, all solder joints have been inspected and any loose connections re-soldered, installed a new power toggle switch, installed four feet on the bottom of chassis. After the restoration was complete, this amplifier was bench tested and it is in great working / sounding condition. As the photos show, this vintage amplifier is exceptionally clean and was well cared for and maintained over the years. The entire face still looks very good but it does have a couple minor cosmetic blemishes (shown in the photos). As mentioned previously, a new power switch was installed on the side of this amp and, the two knobs on the left and right side (4 total) are not original to this unit. The original power cord is in great shape and is not brittle. All of the transformers and the chassis (inside and out) show only minimal wear and no corrosion. This is one of the cleanest Scott 222 amps that I have come across in a long time. Own this vintage H. Scott 222 vacuum tube stereo amplifier for a great price. The item “Vintage H. H. Scott 222 A 6BQ5 Tube StereoMaster Amplifier Clean & Restored” is in sale since Wednesday, August 4, 2021. This item is in the category “Consumer Electronics\Vintage Electronics\Vintage Audio & Video\Vintage Stereo Receivers”. The seller is “spiritman68″ and is located in Milwaukee, Wisconsin. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Belgium, France, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Croatia, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Pakistan, Paraguay, Reunion, Uruguay.
Vintage Marantz 8 Vacuum Tube Power Amplifier EL34 30 WPC Tested & Clean Overall Unit. This listing includes one Vintage Marantz Model 8 (S/N: 2913) Vacuum Tube Power Amplifier with its tube cover and in clean overall tested working order. This early Model 8 appears to be in original overall condition. We have removed the bottom cover (has one broken foot) to show the original components as shown. Amplifier plays very well through both channels with clear and powerful output. This amplifier has been in Southern CA for many years; there are no signs of corrosion; with only light signs of surface pitting on a few exterior spots. Unit appears to be in very nice overall condition – inside and outside. With all vintage 50-60 year old tube equipment we would suggest the new owner has a qualified technician go through the unit first to bench test and check all older resistors, caps, etc. Please note: original power cord appears frail and should be replaced soon. Power output: 30 watts per channel into 8 (stereo). Frequency response: 20Hz to 20kHz. Total harmonic distortion: 0.1%. Input sensitivity: 1.3V. Signal to noise ratio: 90dB. Speaker load impedance: 4 to 16. Valve complement: 2 x 6BH6, 2 x 6CG7, 4 x EL34. Dimensions: 13.5 x 7.25 x 10.5 inches. Please review all attached photos; and be sure to ask any questions. Please message for rates. Tubejunkie is in Lancaster, CA. Please note: some of our items may arrive in separate packages. The item “Vintage Marantz 8 Vacuum Tube Power Amplifier EL34 30 WPC Tested & Clean Overall” is in sale since Saturday, May 15, 2021. This item is in the category “Consumer Electronics\Vintage Electronics\Vintage Audio & Video\Vintage Amplifiers & Tube Amps”. The seller is “tubejunkie” and is located in Lancaster, California. This item can be shipped to United States.
A DETAILED DESCRIPTION OF THIS RARE, CLEAN, AND NICE-LOOKING VINTAGE PACKARD. BELL EL84 STEREO TUBE AMPLIFIER IS PROVIDED AFTER THE PHOTOS. PLEASE SCROLL DOWN TO SEE THE DESCRIPTION. It is made by Packard-Bell. This estate sale had a small group of Packard-Bell tube amplifiers and I bought all of them. However, I found another one which I had forgotten about! It has a different model number on it DPA-30-3 v. This amplifier has an attractive and clean chassis with a really nice appearance. I believe that this particular amplifier would make a great addition to any vintage tube amplifier collection. DETAILED INFORMATION INVOLVING THE AMPLIFIER. As the photos show, the amplifier is has a really nice appearance in my opinion. It is very retro-looking and has a well-organized layout of tubes and components in my view. Please check out all of the photos that I have provided which show the amplifier from many different views. He apparently liked Packard-Bell products and had a number of different Packard-Bell consoles and amplifiers as mentioned above. As shown in the photos, there is a small pink paper sticker on one side of the amplifier chassis which has some information on it including an indication that this amplifier is a Model DPA-30-4. The sticker also has the following additional information on it: No. 10318 and PB # 71396-23. As mentioned above, this amplifier has a really unique and cool-looking appearance. Likewise, it is very clean as shown in the photos. Other than this information, I know nothing more about this amplifier and its history. As noted in this description, the amplifier chassis looks very nice and clean in my view. It does have some discolored areas, scuffs, scratches, bends, scrapes, marks, swirls, stains, dings, dents, rough spots, residue (including some dried unknown brown material/spots along one side), etc. On it from age, use, etc. Please check out the many photos of the chassis that I have provided which show it from a number of different angles. Many of the above-listed items are too small to be picked up by the camera in the photos and, in my opinion, this amplifier has a very distinctive and nice look to it. Located on the top surface of the amplifier are 2 output transformers. They are matching transformers in that they both have the same code numbers on them, namely, 89532 and 3946338. Also located on the top surface of the amplifier is a large power transformer which is painted black. This transformer is very big and heavy. Most of the black paint on the transformer is present but I noticed that there are a number of crack-lines in the paint (possibly from heat and use although I dont know for sure), along with various chips, ripples, scratches, scrapes, dents, dings, creases, and missing paint areas (some of which appear to have been touched-up with a black pen by the amplifiers former owner although I dont know if this is actually true or not). Please check out the various photos of this transformer that I have provided. I dont know if these power and output transformers are good, functional, original, operational, if they have been worked on or repaired, if they are complete, if they are correct and proper for this amplifier, etc. Also on the amplifier chassis are a number of other items. These items include: (A) 2 small jacks on one side of the amplifier chassis; (B) a large brown plastic socket on the top of the amplifier chassis; (C) a small black plastic outlet on one side of the amplifier chassis; and (D) 2 small semi-circular sockets on one side of the amplifier chassis. I know nothing about these jacks, sockets, and outlet, and I also do not know if they work, how they work, what they are supposed to do, if they are correct, if they are functional, if they are original, if they have been worked on or repaired, if they are complete, if they are correct and proper for this amplifier, etc. To the best of my knowledge, there is no on/off switch or other controls on this amplifier. I also do not know if the power cord/plug is good or not and if it is original, functional, operational, correctly-wired, correct and proper for this amplifier, etc. I have not inspected or tested the power cord/plug (or any of the other components and parts used by the amplifier, as well as the amplifier as a whole) as noted herein. The top surface of the amplifier also includes a really nice-looking metal colorful name-plate which says PB in a very distinctive type-style. This name-plate is really interesting-looking! It does have some bends, uneven surfaces, etc. On it here and there but it looks really nice in my opinion. In addition, I dont know how the name-plate is affixed to the chassis (possibly using some kind of adhesive but I dont really know). Likewise, I dont know if it is original or not (and goes with this particular amplifier) In any event, however, the name-plate is really cool-looking in my view and check it out in the photos that I have provided. Regarding the tubes which are included with the amplifier (and came with it when I bought it), they are as follows: (see the photos of the tubes): (A) 6BQ5 (EL84); (B) 6BQ5 (EL84); (C) 6BQ5 (EL84); (D) 6BQ5 (EL84); (E) 7025/12AX7A; (F) 7025/12AX7A; and (G) 5U4GB. I did not test these tubes and I therefore do not know if they are good or not. Since there is no tube-diagram on this amplifier, I dont know if the above-listed tubes are in the correct sockets in the photos and if they are the correct tubes for this amplifier. I also did not check the tube sockets and I likewise cannot warrant or guarantee that they are good, original, and operational. I will therefore leave all of the issues with all of the tube sockets and the tubes whether the tubes are good, whether the sockets are good, what sockets the tubes should be in, what tubes are correct for this amplifier, etc. Also, I have no idea if the wiring in the amplifier is correct or good and I dont know anything about the transformers used by the amplifier if they are correct, original, good, functional, etc. Regarding the electronic components used by the amplifier, I have provided an underside view of the amplifier in the photos which shows various components, parts, wires, etc. I have no idea if any work has been done on this amplifier in the past and if the components, parts, wires, etc. Are correct, original, appropriate and proper for this amplifier, if they are correctly wired/installed, etc. In summary, this amplifier is, in my view, nice-looking, clean, impressive, and has a very distinctive retro appearance. I therefore believe that this amplifier would make a wonderful addition to any vintage amplifier collection and a really fun item to own. I have not done anything to this amplifier and all of its parts, transformers, wires, electronic components, tubes, sockets, power cord/plug, capacitors, resistors, jacks, outlet, and all of its other components and I know nothing about their condition. The above-described amplifier may have been worked on, repaired, had parts replaced/repaired, had parts added/subtracted, and/or been modified by someone else in the past, but I dont know whether this is true or not. In this regard, I have done nothing to this amplifier and I have not inspected it (or any of its parts/components) internally or externally. However, I do not know how much work, parts, wires, wiring work/replacement, repairs, rewiring, upgrading, power transformer replacement/repair, output transformer replacement/repair, electronic components, power cord/plug replacement, additional parts, tubes, jacks, sockets, outlets, resistors, capacitors, plugs, etc. Likewise, this amplifier does not have a pilot light, tube shields, on/off switch and any controls (to the best of my knowledge), etc. Furthermore, no other items such as paperwork, instructions, schematics, boxes, cartons, or any other items are included with this amplifier. Likewise, it does not appear that there is any fuse in this amplifier it does not appear that there was ever one since there is no fuse-holder, etc. Although I dont know if this is correct or not and I cant tell if it currently has a fuse/fuse-holder or if it ever had one. I will leave any changes, modifications, repairs, inspections, assessments, tests, replacement of any parts, upgrades, corrections, rewiring, additions of any parts, subtractions of any parts, expansions, etc. This amplifier is quite heavy. While I will pack this item very securely, some of the wires, components, parts, capacitors, resistors, sockets, transformers, jacks, power cord/plug, name-plate, outlet, resistors, etc. Furthermore, the paper model number tag is quite delicate and may, in fact, partially or entirely come off, tear, rip, crumble, etc. In addition, the black paint on the power transformer is also quite delicate and one or more portions, chips, etc. However, I will do my best to try and prevent these situations by very carefully packing this amplifier although I cannot guarantee that they wont happen. Please make a note of this. Furthermore, all of the tubes, tube sockets, capacitors, resistors, jacks, transformers, power cord/plug, sockets, outlet, and all of the amplifiers other components/parts need to be checked out by an electronic expert to see if the tubes are good, if the tubes are the correct ones for this amplifier, if the tubes are in the correct sockets, and if all of the tubes, tube sockets, capacitors, resistors, jacks, transformers, power cord/plug, sockets, outlet, and all of the amplifiers other components/parts are good, correct, properly-wired, and operational before the amplifier is powered-up, tested, used, worked on, modified, connected to any other equipment, instruments, speakers, or components, connected to a power source/supply, plugged in, upgraded, etc. Likewise, I have no idea whether everything is original or not in the above-listed equipment and I therefore cannot make any warranties regarding originality. In this regard, I do not know if any of the parts, power transformer, output transformers, capacitors, resistors, jacks, sockets, outlet, and all of the other components used in the amplifier are original or if they have been replaced at some time in the past. I also do not warrant that this amplifier is complete and I do not know if there are any missing or incorrect parts/components, etc. The item “RARE VINTAGE PACKARD-BELL EL84 STEREO TUBE AMP AMPLIFIER (NICE-LOOKING & CLEAN!)” is in sale since Sunday, June 6, 2021. This item is in the category “Consumer Electronics\Vintage Electronics\Vintage Audio & Video\Vintage Amplifiers & Tube Amps”. The seller is “jaymalkin” and is located in Wheat Ridge, Colorado. This item can be shipped to United States.
Up for sale, a 1973 Fender Twin Reverb in excellent condition and in perfect working order with a 100% original circuit. Loaded with a pair of unusual and early Eminence/Fender ceramic 12 drivers and a near complete set of original RCA tubes, this amp lives up to its reputation for having the most formidable, glassy, and balanced clean tones a tube amp can provide. Perfect not only for guitar, the Twin is an excellent choice for any scenario where headroom is a must, performing equally well with a pedal steel or your favorite Rhodes piano. The circuit is untouched, right down to the original power supply caps, and all of the original Schumacher transformers date between the 26th and 29th weeks of 1973. All of the original CTS pots are present as well, dating to’73. The chassis has a clean faceplate and full compliment of original knobs. The tube compliment includes three RCA 6L6s in the power section with one substituted Realistic-branded valve that does the part to round out the quad, while the preamp is outfitted with the full set of original matched RCA valves. Inside the cabinet, the original tube chart is intact, and the pair of Eminence-manufactured 12 speakers have clean brown/gold Fender labels on the ceramic magnets, with clean black frames and viable cones. These speakers are a prototypical pair for Eminence, aping the look of the earlier Jensens seen in Fender’s Blackface-era Twins, yet undoubtedly original, given the matching 1973 date stamps on the edges of the frames. The smooth black tolex and silver sparkle grillcloth is quite clean, as is all of the original hardware, save for an MIA set of tilt-back legs. Check out our shop “Mike & Mike’s Guitar Bar, ” and please let us know if we can answer any questions! International orders will be declared as merchandise, and the value of merchandise will be declared as the amount paid. We cannot declare anything as a gift or for a lesser value. We do our best to describe all items with honesty and accuracy, but to be sure, please. The item “1973 Fender Twin Reverb Silverface Vintage 2×12 Tube Amp, Clean & Original” is in sale since Sunday, November 15, 2020. This item is in the category “Musical Instruments & Gear\Guitars & Basses\Guitar Amplifiers”. The seller is “mmguitarbar” and is located in Seattle, Washington. This item can be shipped worldwide.
USED Vintage zenith stereo tube amplifier model 7K31, very beautiful and clean. What you see in the picture is what you get. Includes tubes: one 5U4, four 6BQ5, two 6FQ7. All the tubes light up. The item “USED Vintage zenith stereo tube amplifier model 7K31, very beautiful and clean” is in sale since Saturday, March 13, 2021. This item is in the category “Consumer Electronics\Vintage Electronics\Vintage Audio & Video\Vintage Amplifiers & Tube Amps”. The seller is “qian_7155″ and is located in Brooklyn, New York. This item can be shipped to United States.
Vintage Fender Bronco Vibrochamp Tube Amp Outstanding Clean Original Serviced Condition. This amp has been tested, all contact points and pots have been professionally cleaned, and it is working great. Amp appears all original including capacitors, resistors, speakereverything except for a new 3 prong grounded power cord and the rear panel screws (top panel is missing). The tubes are all vintage RCA and period correct. Transformer and speaker codes indicate this is a 1968 model. Cabinet is solid pine. The vibrato is warm and silky and the amp has both Fender clean tones and a nice distortion when cranked. Please see pictures for a full description and feel free to ask questions. This amp is ready to play. The item “Vintage Fender Bronco/Vibrochamp Tube Amp Outstanding Clean Original Serviced” is in sale since Monday, November 2, 2020. This item is in the category “Musical Instruments & Gear\Guitars & Basses\Guitar Amplifiers”. The seller is “craftsman444″ and is located in Columbia, Missouri. This item can be shipped to United States.
But the controls definitely need to be clean since it was in the closet for a few months. Its working but may needs normal service, (controls Greased and cleaned). The cosmetics condition is very good. ONCE AGAIN IT WORKS BUT NEEDS CLEAN UP. Pictures are part of the description so please see them carefully and make your own conclusion about the items. WHAT YOU SEE IS WHAT YOU GET. Feel free to any questions. Is very important for Us make costumers happy. The item “Vintage DAVID BOGEN MODEL DB 110G Tube Amp Amplifier, Works Great, Needs Clean Up” is in sale since Thursday, September 24, 2020. This item is in the category “Consumer Electronics\Vintage Electronics\Vintage Audio & Video\Vintage Amplifiers & Tube Amps”. The seller is “vilo20102013″ and is located in Flushing, New York. This item can be shipped to United States.
