Vintage’60′s Westinghouse Single-Ended 6BQ5 / 12AX7 Stereo Tube Amp / Preamp

Thursday, May 28th, 2020
Vintage'60's Westinghouse Single-Ended 6BQ5 / 12AX7 Stereo Tube Amp / Preamp

Vintage'60's Westinghouse Single-Ended 6BQ5 / 12AX7 Stereo Tube Amp / Preamp

Vintage'60's Westinghouse Single-Ended 6BQ5 / 12AX7 Stereo Tube Amp / Preamp

Vintage'60's Westinghouse Single-Ended 6BQ5 / 12AX7 Stereo Tube Amp / Preamp

Vintage'60's Westinghouse Single-Ended 6BQ5 / 12AX7 Stereo Tube Amp / Preamp

Here is a vintage’60′s Westinghouse single-ended stereo tube amplifier. This is an integrated amp / preamp using 2 12AX7 / ECC83 preamp tubes and 2 6BQ5 / EL84 output tubes. Also 1 6CA4 rectifier tube. All are the original Westinghouse tubes which have been tested and have strong and balanced output. Front controls are, from left to right, volume, balance, bass and treble. Has input on one side for headphones. White and yellow cables are the L&R speaker wires. This is a vintage unit which has been tested and works fine. Red and black wires are the input cables. Line level input works for ceramic phonos, CD, tape, sound card and other high level devices. Controls have been cleaned and work smooth with no static. Good balanced clean output. Will be well packed for transport. The item “Vintage’60′s Westinghouse Single-Ended 6BQ5 / 12AX7 Stereo Tube Amp / Preamp” is in sale since Tuesday, April 7, 2020. This item is in the category “Consumer Electronics\Vintage Electronics\Vintage Audio & Video\Vintage Amplifiers & Tube Amps”. The seller is “dandddeals” and is located in Bedford, Pennsylvania. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Turks and caicos islands, Bangladesh, Brunei darussalam, Bolivia, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Luxembourg, Monaco, Macao, Martinique, Nicaragua, Pakistan, Paraguay, Uruguay.
  • Country/Region of Manufacture: United States
  • Type: Integrated Amplifier
  • Brand: Westinghouse

1 Single-Ended Vintage 45 Tube Amplifier With Tamura Output & Power Transformers

Sunday, March 8th, 2020
1 Single-Ended Vintage 45 Tube Amplifier With Tamura Output & Power Transformers

1 Single-Ended Vintage 45 Tube Amplifier With Tamura Output & Power Transformers

1 Single-Ended Vintage 45 Tube Amplifier With Tamura Output & Power Transformers

1 Single-Ended Vintage 45 Tube Amplifier With Tamura Output & Power Transformers

1 Single-Ended Vintage 45 Tube Amplifier With Tamura Output & Power Transformers

1 Single-Ended Vintage 45 Tube Amplifier With Tamura Output & Power Transformers

1 Single-Ended Vintage 45 Tube Amplifier With Tamura Output & Power Transformers

1 Single-Ended Vintage 45 Tube Amplifier W/ Tamura Output & Power Transformers. Single-ended custom 45 triode tube stereo class A audio amplifier with Tamura transformers. Clean look & design. This hand-built stereo amplifier features A deluxe Tamura power transformer that offers many AC voltage options. See the last picture in the listing of the power transformer. The heavy-duty Tamura power transformer will run all day and not get hot. It is a commercial broadcast-grade transformer. These are not made today and are from the 1960s. No transformer built today can match this quality. Chassis size is 17″ x 10 X 3″. Bud brand heavy all steel chassis to better support the transformers. ElectroCube audio grade Mylar capacitors. Point to point hand wiring, with no circuit boards that are difficult to repair and often go bad. If other sellers do not show under the chassis it may be because they use overseas circuit boards. Two gain controls — one for left and one for the right hand. These are Alpha professional brand studio audio gain controls. With one for each channel, you can use them as a balance control only better. As you do not need a preamplifier to accomplish this function. Top of the line Tamura brand power transformer — The Tamura power transformer in this amplifier is a 1960 vintage. It has a large heavy copper band shield around the windings to eliminate hum. It is one of the best power transformers ever made. If they were to reproduce a transformer of this quality today, the cost would be no less than 300.00. Many power transformers just meet the minimun amperage requirement so they get very hot. Not with this Tamura transformer it is a commercial-grade unit and can run all day and just get warm. The last picture is of the transformer used in this amplifier. You can see the large copper band and the quality construction. Check out our entire store for more great products and deals! We do however make every possible attempt to accurately describe the inventory we sell and stand behind it. Since 2016, 8TEN Industries has been a leading asset recovery provider supporting national retailers, brands, and manufacturers. Our 60,000 square foot processing and distribution facility located in Cass City, Michigan has allowed us to become industry leader in turning difficult problems for manufacturers into great deals for our customers. The item “1 Single-Ended Vintage 45 Tube Amplifier With Tamura Output & Power Transformers” is in sale since Wednesday, February 26, 2020. This item is in the category “Consumer Electronics\Vintage Electronics\Vintage Audio & Video\Vintage Parts & Accessories\Vintage Transformers”. The seller is “8ten1944″ and is located in Cass City, Michigan. This item can be shipped to United States.
  • Brand: Unbranded
  • MPN: Does Not Apply

Single-ended vintage 45 tube amplifier Tamura Transformers 120 or 240 V Amp # 3

Tuesday, May 7th, 2019
Single-ended vintage 45 tube amplifier Tamura Transformers 120 or 240 V Amp # 3

Single-ended vintage 45 tube amplifier Tamura Transformers 120 or 240 V Amp # 3

Single-ended vintage 45 tube amplifier Tamura Transformers 120 or 240 V Amp # 3

Single-ended vintage 45 tube amplifier Tamura Transformers 120 or 240 V Amp # 3

Single-ended vintage 45 tube amplifier Tamura Transformers 120 or 240 V Amp # 3

Single-ended vintage 45 tube amplifier Tamura Transformers 120 or 240 V Amp # 3

Single-ended vintage 45 tube amplifier Tamura Transformers 120 or 240 V Amp # 3

Single-ended vintage 45 tube amplifier Tamura Transformers 120 or 240 V Amp # 3

Single-ended custom 45 triode tube stereo class A audio amplifier with Tamura transformers. This hand-built stereo amplifier features: special power transformer many & voltage options to operate all over the. Heavy all steel chassis to better support the transformers. ElectroCube audio grade Mylar capacitors. Point to point hand wiring, with no circuit boards that are difficult to repair and often go bad. Two gain controls — one for left and one for right hand. These are Alpha professional brand studio audio gain controls. With one for each channel you can use them like a balance control only better. Vintage super high quality Military surplus hum rheostat. Top of the line Tamura brand power transformer — The Tamura power transformer in this amplifier is a 1960 vintage. It has a large heavy copper band around the. It is one of the best power transformers ever made. If they were to reproduce a transformer of this quality today, the cost would be no less than 300.00. I took a picture of one of these transformers before I painted it so you can see the super quality. Surplus Military steel off/on light fixture. This amplifier offers input voltages of 240, 220, 120, 110, and 100 volts. Superior speaker 3 way connector. Solid copper buss bar ground strap wire. High voltage US Military grade surplus Amphenol tube sockets, that will last forever, Not the ones from China that fall apart with normal use. Clean chassis look not a bunch of screws and washers holding the tube sockets. These sockets are vintage NOS Military grade with clips under the chassis to hold them in place. High quality set screw knobs Not the cheap plastic push on knobs you see on most modern audio. This is the best sounding amplifier available anywhere, Single ended with Tamura transformers. The 45 tube is the most musical tube ever invented, Beautiful clean clear highs and warm but very crisp bass. You will notice the difference the second it comes on. Audio collectors have ask that I use the ultimate Tamura power transformer that have many input AC voltages, so I built this special amp for you. This power transformer is so heavy built I can run the amplifier all day and the transformer just gets warm. Each of these Class A 45 triode single-ended amplifiers I custom build, is a little different. NO TWO ARE THE IDENTICAL. Some are different colors and may use other vintage parts. The amplifiers I build all have the same incredible circut, design, and sound, but like a painting they are done by hand, and no two are identical. I do not get these from a factory they are all hand built. I have been building and enjoying my homemade amplifiers for many years. It is a fun hobby, because I can use some. The best parts that were ever available regardless of what year these parts were produced. Like in this amplifier, I might use tubes from the 1930′s, transformers from the 1960′s, tube sockets from the 1940′s, and modern top quality Alpha brand gain controls. I only hand wire point to point connections in my shop my self. The other reason I build my own amplifiers is I can use some of the best triode output tubes ever made, in combination with a single-ended Class A output design. I can build Amplifiers that were never available for mass production. I also use low-mu triode tubes for sound quality, and to lower the chance of micro phonics like Brook and Fisher did in some of their best quality studio laboratory amplifiers. I use new Alpha gain controls for each channel. That way they can act like a left & right balance control only better. This is the best watt I have ever listened to”, “. Only one way to describe the sound of this amplifier: breathtaking. Great sounding amp Good packing Excellent service Thank you!!! Amp has superb build and sound transparency that reveals deeper layers of music. This amplifier will put out about 1-1/2 watts per side to 8-ohm speakers (remember it is the first watt that counts). To make this amplifier sound best you should run efficient 8-ohm vintage speakers, like Klipsch, JBL Tannoy, Jensen, Altec and other speakers rated around 20 watts or less. My son runs a pair of Klipsch Heresy with his identical amplifier and it has the power to spare. This amplifier will not rattle the windows with power, but at normal listening levels it will amaze you, and fill a room with plenty of great sound. These transformers give my amplifiers that magical sound that no other amplifier can match and you can only get from Class A Triode single-ended design. Tamura no longer makes these transformers and the ones I used in this amplifier were made back in the 1960′s. These are hand wound inner-leaved permalloy output transformers, and they produce a magical sound that you cannot get from any other transformers. The output transformers are designed for 8-ohm efficient speakers. Sellers that tell you that it does not matter what ohms speakers you connect to their amplifiers are wrong. You should only connect the proper ohm speakers to the corresponding connection. These Tamura output transformers have a 5000-ohm primary which is perfect for the SE 45 tubes. Some sellers will say you can use several different numbered output tubes in their amplifiers. If that were true transformer manufactures would not need to build transformers to match up with the exact output tubes, they could just make a couple of output transformers that would work for many tubes. A 2A3 tube amplifier should have a primary transformer that is 2500 ohms. The 45 tube requires a 5,000 ohm output transformer. You cannot have a output transformer that would be the perfect match for a 45 and at the same time a perfect match for a 2A3 tube. It would be a bad mismatch for either the 45 or the 2A3 or maybe both. When you match up the correct Tamura output transformer to the correct triode tube you get those crystal clear highs and the very clean bass punch you have been looking for. My custom amplifier projects start off as raw Bud brand metal chassis that I punch out, then sand and finish. I round and shape the corners so they are smooth. This amp is all hand wired. You will enjoy the heavy, quality feel of this amp, the smooth rounded edges on the chassis, and the quality hardware nuts & bolts using lock washers securing the parts. It takes me about one week to build one of these from start to finish, and longer to source the vintage top quality parts I want to use. This amplifier comes with the used. MADE IN THE USA tubes you see in the picture I DO NOT USE THE CHINESE NOCK OFF TUBES. The tube lineup is two 45 triode tubes, two 6SN7 tubes, and one 6AX5 rectifier. You may someday want to upgrade to new or more expensive tubes and I will leave that to the new owners. Thanks for the read. I noticed most of the sellers of single ended triode class A amplifiers do not show the wiring under the chassis. I do show under my chassis so you can see that there are no circuit boards in my amplifiers. I use just simple point to point wiring. Each part is easy to identify, and would be easy to repair if ever it went bad. I build these amplifiers so they will hold they’re value and last a life time. The circuit board electronics with Chinese parts as you know will not hold they’re value or last. The item “Single-ended vintage 45 tube amplifier Tamura Transformers 120 or 240 V Amp # 3″ is in sale since Wednesday, April 24, 2019. This item is in the category “Consumer Electronics\Vintage Electronics\Vintage Audio & Video\Vintage Amplifiers & Tube Amps”. The seller is “eclectic_electrics” and is located in Grass Valley, California. This item can be shipped worldwide.
  • Non-Domestic Product: No
  • Model: Tamura Transformers
  • Modified Item: No
  • Country/Region of Manufacture: United States
  • Custom Bundle: No
  • Brand: custom hand made
  • Type: Power Amplifier

Single-ended vintage 45 tube amplifier Tamura Transformers 120 or 240 V Amp # 2

Friday, May 3rd, 2019
Single-ended vintage 45 tube amplifier Tamura Transformers 120 or 240 V Amp # 2

Single-ended vintage 45 tube amplifier Tamura Transformers 120 or 240 V Amp # 2

Single-ended vintage 45 tube amplifier Tamura Transformers 120 or 240 V Amp # 2

Single-ended vintage 45 tube amplifier Tamura Transformers 120 or 240 V Amp # 2

Single-ended vintage 45 tube amplifier Tamura Transformers 120 or 240 V Amp # 2

Single-ended vintage 45 tube amplifier Tamura Transformers 120 or 240 V Amp # 2

Single-ended vintage 45 tube amplifier Tamura Transformers 120 or 240 V Amp # 2

Single-ended custom 45 triode tube stereo class A audio amplifier with Tamura transformers. This hand-built stereo amplifier features: special power transformer many & voltage options to operate all over the. Heavy all steel chassis to better support the transformers. ElectroCube audio grade Mylar capacitors. Point to point hand wiring, with no circuit boards that are difficult to repair and often go bad. Two gain controls — one for left and one for right hand. These are Alpha professional brand studio audio gain controls. With one for each channel you can use them like a balance control only better. Vintage super high quality Military surplus hum rheostat. Top of the line Tamura brand power transformer — The Tamura power transformer in this amplifier is a 1960 vintage. It has a large heavy copper band around the. It is one of the best power transformers ever made. If they were to reproduce a transformer of this quality today, the cost would be no less than 300.00. I took a picture of one of these transformers before I painted it so you can see the super quality. Surplus Military steel off/on light fixture. This amplifier offers input voltages of 240, 220, 120, 110, and 100 volts. Superior speaker 3 way connector. Solid copper buss bar ground strap wire. High voltage US Military grade surplus Amphenol tube sockets, that will last forever, Not the ones from China that fall apart with normal use. Clean chassis look not a bunch of screws and washers holding the tube sockets. These sockets are vintage NOS Military grade with clips under the chassis to hold them in place. High quality set screw knobs Not the cheap plastic push on knobs you see on most modern audio. This is the best sounding amplifier available anywhere, Single ended with Tamura transformers. The 45 tube is the most musical tube ever invented, Beautiful clean clear highs and warm but very crisp bass. You will notice the difference the second it comes on. Audio collectors have ask that I use the ultimate Tamura power transformer that have many input AC voltages, so I built this special amp for you. This power transformer is so heavy built I can run the amplifier all day and the transformer just gets warm. Each of these Class A 45 triode single-ended amplifiers I custom build, is a little different. NO TWO ARE THE IDENTICAL. Some are different colors and may use other vintage parts. The amplifiers I build all have the same incredible circut, design, and sound, but like a painting they are done by hand, and no two are identical. I do not get these from a factory they are all hand built. I have been building and enjoying my homemade amplifiers for many years. It is a fun hobby, because I can use some. The best parts that were ever available regardless of what year these parts were produced. Like in this amplifier, I might use tubes from the 1930′s, transformers from the 1960′s, tube sockets from the 1940′s, and modern top quality Alpha brand gain controls. I only hand wire point to point connections in my shop my self. The other reason I build my own amplifiers is I can use some of the best triode output tubes ever made, in combination with a single-ended Class A output design. I can build Amplifiers that were never available for mass production. I also use low-mu triode tubes for sound quality, and to lower the chance of micro phonics like Brook and Fisher did in some of their best quality studio laboratory amplifiers. I use new Alpha gain controls for each channel. That way they can act like a left & right balance control only better. This is the best watt I have ever listened to”, “. Only one way to describe the sound of this amplifier: breathtaking. Great sounding amp Good packing Excellent service Thank you!!! Amp has superb build and sound transparency that reveals deeper layers of music. This amplifier will put out about 1-1/2 watts per side to 8-ohm speakers (remember it is the first watt that counts). To make this amplifier sound best you should run efficient 8-ohm vintage speakers, like Klipsch, JBL Tannoy, Jensen, Altec and other speakers rated around 20 watts or less. My son runs a pair of Klipsch Heresy with his identical amplifier and it has the power to spare. This amplifier will not rattle the windows with power, but at normal listening levels it will amaze you, and fill a room with plenty of great sound. These transformers give my amplifiers that magical sound that no other amplifier can match and you can only get from Class A Triode single-ended design. Tamura no longer makes these transformers and the ones I used in this amplifier were made back in the 1960′s. These are hand wound inner-leaved permalloy output transformers, and they produce a magical sound that you cannot get from any other transformers. The output transformers are designed for 8-ohm efficient speakers. Sellers that tell you that it does not matter what ohms speakers you connect to their amplifiers are wrong. You should only connect the proper ohm speakers to the corresponding connection. These Tamura output transformers have a 5000-ohm primary which is perfect for the SE 45 tubes. Some sellers will say you can use several different numbered output tubes in their amplifiers. If that were true transformer manufactures would not need to build transformers to match up with the exact output tubes, they could just make a couple of output transformers that would work for many tubes. A 2A3 tube amplifier should have a primary transformer that is 2500 ohms. The 45 tube requires a 5,000 ohm output transformer. You cannot have a output transformer that would be the perfect match for a 45 and at the same time a perfect match for a 2A3 tube. It would be a bad mismatch for either the 45 or the 2A3 or maybe both. When you match up the correct Tamura output transformer to the correct triode tube you get those crystal clear highs and the very clean bass punch you have been looking for. My custom amplifier projects start off as raw Bud brand metal chassis that I punch out, then sand and finish. I round and shape the corners so they are smooth. This amp is all hand wired. You will enjoy the heavy, quality feel of this amp, the smooth rounded edges on the chassis, and the quality hardware nuts & bolts using lock washers securing the parts. It takes me about one week to build one of these from start to finish, and longer to source the vintage top quality parts I want to use. This amplifier comes with the used. MADE IN THE USA tubes you see in the picture I DO NOT USE THE CHINESE NOCK OFF TUBES. The tube lineup is two 45 triode tubes, two 6SN7 tubes, and one 6AX5 rectifier. You may someday want to upgrade to new or more expensive tubes and I will leave that to the new owners. Thanks for the read. I noticed most of the sellers of single ended triode class A amplifiers do not show the wiring under the chassis. I do show under my chassis so you can see that there are no circuit boards in my amplifiers. I use just simple point to point wiring. Each part is easy to identify, and would be easy to repair if ever it went bad. I build these amplifiers so they will hold they’re value and last a life time. The circuit board electronics with Chinese parts as you know will not hold they’re value or last. The item “Single-ended vintage 45 tube amplifier Tamura Transformers 120 or 240 V Amp # 2″ is in sale since Wednesday, April 24, 2019. This item is in the category “Consumer Electronics\Vintage Electronics\Vintage Audio & Video\Vintage Amplifiers & Tube Amps”. The seller is “eclectic_electrics” and is located in Grass Valley, California. This item can be shipped worldwide.
  • Non-Domestic Product: No
  • Model: Tamura Transformers
  • Modified Item: No
  • Country/Region of Manufacture: United States
  • Custom Bundle: No
  • Brand: custom hand made
  • Type: Power Amplifier

Douk Audio Vintage Mini Tube Power Amplifier Single-Ended Stereo HIFI AMP 3.5W×2

Monday, January 8th, 2018
Douk Audio Vintage Mini Tube Power Amplifier Single-Ended Stereo HIFI AMP 3.5W×2

Douk Audio Vintage Mini Tube Power Amplifier Single-Ended Stereo HIFI AMP 3.5W×2

Douk Audio Vintage Mini Tube Power Amplifier Single-Ended Stereo HIFI AMP 3.5W×2

Douk Audio Vintage Mini Tube Power Amplifier Single-Ended Stereo HIFI AMP 3.5W×2

Douk Audio Vintage Mini Tube Power Amplifier Single-Ended Stereo HIFI AMP 3.5W×2

Douk Audio Vintage Mini Tube Power Amplifier Single-Ended Stereo HIFI AMP 3.5W×2

Douk Audio Vintage Mini Tube Power Amplifier Single-Ended Stereo HIFI AMP 3.5W×2

Douk Audio Vintage Mini Tube Power Amplifier Single-Ended Stereo HIFI AMP 3.5W×2

Douk Audio Vintage Mini Tube Power Amplifier Single-Ended Stereo HIFI AMP 3.5W×2

Douk Audio Vintage Mini Tube Power Amplifier Single-Ended Stereo HIFI AMP 3.5W×2

DAC / Audio Decoder. Digital Interface / Sound Card. AV Tube Integrated Amplifier. PSU / Power Supply. Audio HiFi & DIY. Tube Amplifier DIY Kit. 3.5 Line Out Cable. Douk Audio Vintage Mini Tube Power Amplifier Single-Ended Stereo HIFI AMP 3.5W×2. Mini Vacuum Tube Amplifier (wood chassis). “Moonlight over the Lotus Pond” is Douk Audio Studio Nobsound’s new series in 2017. In this prose, Zhu expressed his desire to be free and go beyond the reality in the turbulent times. We engrave and name our new series with this prose title, and hope that we can all find a peaceful place for ourseleves in this impetuous and fast-paced era. This device is totally handmade with large areas of high quality solid wood. Every wood grain contains the emotion of our producers and you will feel it from the device and sound. The harmoniuos tube light plus the warm sound will make you peaceful and relieved. What’s more, with its super mini size. Most of the machines are the same size as your palm. , you can enjoy this product conveniently without extra trouble. Tubes: 6N9P×1 Replace tube: 6H9C/6SL7 etc. + 6P6P×2 Replace tube: 6V6GT etc. Type: Single-ended class A. Audio input: Stereo L/R RCA. Audio output: Banana Speaker Jacks. Output power: 3.5W × 2. Frequency response: 35HZ-20KHZ (±3DB). Signal to noise ratio: 80DB. Working voltage: 100V-240V (Universal). Net weight: about 1.5KG (2.4Kg with Package). Size: 158mm × 170mm × 120mm (W × D × H). (Contain the protruding part). May be a little flaws. Is not the same. And some components may out of stock. The physical objects and pictures may be slightly different. A few days to prepare. Or expedited service such as EMS or DHL. (5-10 days to most countries). The postmark date is applicable. We are always willing to work out a mutually agreeable solution with our customers. The address on the parcel is NOT the return address. We are dedicated to offer the best products at the lowest price to our customers. Bringing great products and customer service. And thus help enriching our customers’ lives is our ultimate goal. During holiday , pls allow us to response you early next week , kindly not leaving negtive/neutral feedback or make dispute/claim out of our working hours, thank you for your cooperation. The item “Douk Audio Vintage Mini Tube Power Amplifier Single-Ended Stereo HIFI AMP 3.5W×2″ is in sale since Tuesday, April 11, 2017. This item is in the category “Consumer Electronics\TV, Video & Home Audio\Home Audio Stereos, Components\Amplifiers & Preamps”. The seller is “doukmall” and is located in shenzhen. This item can be shipped worldwide.
  • Brand: Douk Audio
  • Type: Mini amplifier
  • Number of Channels: 2
  • Model: LOTUS-N9V6-A
  • MPN: DJ375
  • Audio Inputs: Stereo L/R RCA
  • Number of L/R RCA Inputs: 1
  • Number of Digital RCA Inputs: 1
  • Audio Outputs: Banana Speaker Jacks
  • RMS Power: 3.5W*2
  • Amplifier Class: A
  • Features: Active Amplification
  • Country/Region of Manufacture: China