Very cool vintage 70′s/80′s Electro Harmonix Hot Tubes pedal. Pedal shows some age wear. Overall in nice condition. Pedal works and sounds great.

This is a beautiful, vintage 1970s Music Man 210 Sixty-Five 65-Watt hybrid tube guitar combo amplifier, proudly made in Anaheim, California. The amplifier features a dual-channel setup with built-in reverb and tremolo, outputting legendary, pristine high-headroom clean tones. This package is in excellent cosmetic condition and comes complete with the original Music Man dual footswitch and its vinyl slipcover. The unit has been fully tested and performs with rock-solid reliability.

VINTAGE FENDER SUPER TWIN 2X12 TUBE GUITAR AMPLIFIER 180W USA PROJECT PARTS REPAIR. For sale is a vintage Fender Super Twin 2×12 tube guitar amplifier, made in the USA. I have not attempted to power it on, and no testing has been performed. As shown in the photos, two of the six power tubes are missing, and only one 12-inch speaker is installed. The amplifier is otherwise believed to be complete, and the original transformers appear to be present. Due to its unknown operating condition, I cannot guarantee functionality of any components. Two power tubes are missing and bases are covered. Only one 12 speaker is included. Original transformers appear to be present. Heavy cosmetic wear consistent with age and use. Cabinet shows scratches, scuffs, stains, nicks, and other signs of long-term use and storage. Tolex has tears, peeling, and loose sections that will need to be re-glued or repaired. Fender Super Twin tube amplifier. No footswitch, pedals, cover, manual, or any other accessories are included. 2×12 combo cabinet (one speaker currently installed). Rear panel rated at 180 Watts RMS with High/Low power switch. Approximate weight: 63 lbs. This is an excellent candidate for restoration or repair, or as a donor for valuable vintage Fender components. The amplifier retains what appears to be its original transformers and is being offered exactly as found. For Items listed in working condition, they have to be tested on arrival, if there is any significant difference with the description, contact me immediately. I do my best to describe the items as accurately as possible but I may miss some details or have variance in opinion regarding item condition. Please ask any and all questions you may have regarding this item to ensure your satisfaction. I will issue feedback once I receive it and know item has arrived.

Vintage Hammond Organ Tube Reverberation Amplifier Chassis. 117 Volts AC, 60 Hz. Up for sale is a genuine vintage. Hammond H-AO-44-1 reverberation amplifier chassis. This unit was carefully removed from a fully functional, working organ. These compact, ruggedly built chassis feature high-quality vintage transformers and are highly sought after by audio enthusiasts as donor platforms for custom “lunchbox” DIY tube guitar amplifiers or standalone mono hi-fi blocks. Designed for a 3-tube configuration: Two ECL86/6GW8 triode-pentode output tubes and one EZ81/6CA4 rectifier tube. Includes the original power transformer, output transformer, input/driver terminal strip, and the multi-section aluminum filter capacitor can (Part 0-23154-0). Removed directly from a fully operational organ. The chassis is in uncleaned, as-found cosmetic condition with normal dust and patina from age.

This particular pair tests as NOS+ and are almost perfectly matched. I pulled and matched these from a group of about 20 vintage RCA black plate 6L6GC’s of the same style and these 2 were the strongest, closest matched tubes of the entire group, and while the style of print on them is a little different, their internal construction is identical. Also one tube’s top glass dome is slightly taller than the other, but this is also purely cosmetic. One tube has a CG/1968 date code, and the other a DE/1970 code. The tubes’ test results are displayed in the photos New 6L6 Spec 100% = 6,0. See the photos for physical / cosmetic condition. Also, t he tube boxes are original reused RCA boxes, and not original to 6L6s or these tubes. Notes Regarding Tube Tests. All tubes are tested on an Amplitrex AT-1000 tester in the automatic Fixed Bias Mode (for the most conservative results). Test Results are for a general reference only, and are not a guarantee of performance, nor a guarantee of how they will test on your tester. No real world (audio) performance measurements are taken.

See photos to determine condition.

The product is a vintage Gulbransen APS-5 tube amplifier, featuring a push-pull configuration with 6L6 tubes and a variety of other tube models such as 5U4 and 12AX7. This mono amplifier has one audio input and output, input via RCA connections. Known for its strong sound quality, this classic piece of consumer electronics is a sought-after choice for audiophiles and music enthusiasts looking to add a touch of retro charm to their home audio setup. It is suggested to use matched pair of 6l6gc at least gb as not included. The other tubes are included……. Upgraded to 3 wire grounded cable.. Carrier damage claims are handled by the carrier…….

Up for sale is a rare, matched pair of vintage Japanese 3-way speaker cabinets featuring premium 16-ohm components from Coral and Pioneer. Housed in Mid-Century Asian / Oriental style wooden cabinets with ornate brass medallion pulls, these speaker cabinets double as high-end vintage furniture and top-tier tube-audio equipment. Item is located on ground level for easy loading. System Specs & Driver Breakdown (Per Cabinet). Woofer: 1x 12 Coral 12L-1 HiFi Woofer (16-Ohm, 25W Max, Heavy Die-Cast Frame). Tweeter: 1x Coral Horn/Dome Hi Tweeter (16-Ohm, 20W Max, Crossover >2.5 kHz). Crossover: 1x Coral NT-3E 3-Way Dividing Network (12dB/Oct, 2-Way/3-Way & 8/16-Ohm switches). Attenuators: 2x Pioneer AT-16A Level Controls (16-Ohm L-Pads for Mid & High adjustments). Cabinet Features & Condition. Dimensions: 34″ Height x 23″ Width x 19 Depth (Per Cabinet). Design: Solid wood construction with functional bi-fold front doors to hide or display speaker grilles. Compatibility: 16-Ohm high-efficiency design makes these ideal for vintage tube amplifiers (McIntosh, Dynaco, Fisher, Sansui, Marantz, Pioneer). Condition: Excellent vintage cosmetic shape with minor age-appropriate wear. Fully lined inside with original acoustic felt insulation. All internal wiring and components are original and intact.

Western Electric KS-15750-L1 Tube Tester manufactured by Hickok and designed for professional mutual conductance (Gm) tube testing. This highly sought-after tester was originally built for Western Electric/Bell System service applications and is widely respected among vintage audio collectors, tube enthusiasts, and electronics restorers. May require restoration, calibration, or replacement parts. Please review all photos carefully to determine completeness and cosmetic condition. Only the items shown are included. A rare opportunity to own one of the finest vintage tube testers ever produced. Western Electric, KS-15750-L1, Hickok, Hickok 1575, RD1575, tube tester, vacuum tube tester, mutual conductance, Gm tester, Bell System, Western Electric tester, vintage electronics, audio restoration, tube amplifier, audiophile, vacuum tubes, antique radio, electronics test equipment, collectible, parts repair, restoration project.

120 volts AC input US voltage.