Vintage Triad R-200A power transformer, tested and working. Rated 115V primary, 400V C. At 400mA, plus two 6.3V 3A windings. Shows normal cosmetic wear from previous use.

This 60W toroidal tube output transformer is newly made for high-end Push Pull audio amplifiers. It is an improve version to work with most of the common output tubes. 4 & 8 ohm. 0.1 & 0.2 ohm. 6146B, 6550B, EL34, & KT88.

Untested as is, for parts only. No power cables included.

VINTAGE FENDER SUPER TWIN 2X12 TUBE GUITAR AMPLIFIER 180W USA PROJECT PARTS REPAIR. For sale is a vintage Fender Super Twin 2×12 tube guitar amplifier, made in the USA. I have not attempted to power it on, and no testing has been performed. As shown in the photos, two of the six power tubes are missing, and only one 12-inch speaker is installed. The amplifier is otherwise believed to be complete, and the original transformers appear to be present. Due to its unknown operating condition, I cannot guarantee functionality of any components. Two power tubes are missing and bases are covered. Only one 12 speaker is included. Original transformers appear to be present. Heavy cosmetic wear consistent with age and use. Cabinet shows scratches, scuffs, stains, nicks, and other signs of long-term use and storage. Tolex has tears, peeling, and loose sections that will need to be re-glued or repaired. Fender Super Twin tube amplifier. No footswitch, pedals, cover, manual, or any other accessories are included. 2×12 combo cabinet (one speaker currently installed). Rear panel rated at 180 Watts RMS with High/Low power switch. Approximate weight: 63 lbs. This is an excellent candidate for restoration or repair, or as a donor for valuable vintage Fender components. The amplifier retains what appears to be its original transformers and is being offered exactly as found. For Items listed in working condition, they have to be tested on arrival, if there is any significant difference with the description, contact me immediately. I do my best to describe the items as accurately as possible but I may miss some details or have variance in opinion regarding item condition. Please ask any and all questions you may have regarding this item to ensure your satisfaction. I will issue feedback once I receive it and know item has arrived.

CLASSIC 20 112 COMBO GUITAR AMPLIFIER. Introducing the new Peavey Classic 20 watt 112 combo with an all-tube preamp and power amp, providing the distinctive sonic punch of the larger, iconic amplifiers on which it is based, but in a more compact footprint (7.25″ x 14″ x 7.75/185mm x 356mm x197mm) weighing significantly less (34.7 lbs/15.7 kg). This latest addition brings new life into the legendary product line by now providing players that iconic tone in a package better accommodating to today’s smaller stage and bedroom performances. Boasting two channels that mirror the same voicing and gain structure of its bigger Peavey amplifier siblings, in addition to a specially designed boost function, the Classic 20 112 Combo is a versatile, powerful unit that is equally suitable to virtually all musical styles. Two EL84 power tubes and three 12AX7/ECC83 preamp tubes deliver the rich, warm tube-amplifier tones that are so sought after by players and engineers. Each of the Peavey Classic 20 112 Combo’s channels shares EQ, an effects loop, and reverb (all footswitchable), while the amp’s rear panel features Microphone Simulated Direct Interface (MSDI) with XLR output and USB out, 3-position power attenuator switch allowing for 20 watt, 5 watt or 1 watt operation, and speaker defeat switch. The Classic 20 112 Combo’s front panel includes a ¼ INPUT jack, VOLUME knob, CHANNEL switch for selection of’LEAD’ or’RHYTHM’ channels, PRE-GAIN to control the input level of the lead channel i. Overdrive and gain, POST GAIN to balance the sound between the two channels, BASS, MIDDLE, & TREBLE EQ controls, REVERB to dial in the amount of ambience, a Pilot Light indicating when AC power is being supplied and the Classic 20 112 Combo’s POWER SWITCH is in the “ON” position, STANDBY switch, and OUTPUT TUBE STATUS INDICATION T. LEDS that illuminate red or green, depending on the status of the output tube they are monitoring. 2x EL84 power tubes and 3x 12AX7/ECC83 preamp tubes. Two footswitchable channels with three-band EQ. Footswitchable volume boost on both channels. Footswitchable buffered effects Loop. Tube Status Indication T. Impedance switch for 16 or 8 ohm cabinets. MSDIT Output with XLR and ground lift switch. Attenuator switch for 20 watts, 5 watts or 1 watt output power. Single 16 Ohm Peavey Sheffield 1230+. Weight Packed: 38.58 lb(17.5 kg). Width Packed: 22.2(56.388 cm). Height Packed: 23.8(60.452 cm). Depth Packed: 13.8(35.052 cm).

Vintage Hammond Organ Tube Reverberation Amplifier Chassis. 117 Volts AC, 60 Hz. Up for sale is a genuine vintage. Hammond H-AO-44-1 reverberation amplifier chassis. This unit was carefully removed from a fully functional, working organ. These compact, ruggedly built chassis feature high-quality vintage transformers and are highly sought after by audio enthusiasts as donor platforms for custom “lunchbox” DIY tube guitar amplifiers or standalone mono hi-fi blocks. Designed for a 3-tube configuration: Two ECL86/6GW8 triode-pentode output tubes and one EZ81/6CA4 rectifier tube. Includes the original power transformer, output transformer, input/driver terminal strip, and the multi-section aluminum filter capacitor can (Part 0-23154-0). Removed directly from a fully operational organ. The chassis is in uncleaned, as-found cosmetic condition with normal dust and patina from age.

The Crate V32 Palomino Tube Amp Guitar is a vintage 32-watt amplifier designed for electric guitars. With a single vacuum tube technology, this Class A amplifier is perfect for practice venues. Its brown color and classic design make it a stylish choice for musicians looking for a vintage sound. With a single channel and 8 Ohm impedance, this amplifier offers a warm, full sound that is ideal for bass and guitar players alike.

The basic building blocks of the TransTube® sound are the exclusive designs of the preamp and power amp. The preamp section tailors gain to meet the need for any amount of drive, from crystal clear to thick, smooth sustain. The power amp reacts just like a tube output section by responding to the preamp with natural compression that increases as the amp gets louder. With TransTube, you get a killer amp with widely ranging dynamics and natural “grit, ” just like a tube amp! 8 inch super-duty Blue Marvel® speaker. Two switchable channels: clean and lead. Packed Weight: 21 lb (9.53 kg). Packed Length: 17.87 (45.39 cm). Packed Width: 10 (25.4 cm). Packed Height: 15.62 (39.67 cm).

See photos to determine condition.