Up for sale, a 1974 Fender Princeton in excellent condition and in perfect working order. Unlike its brother the Princeton Reverb, this non-reverb Princeton has much more clean headroom, as the lack of the reverb effect introduces less gain into the circuit, allowing the amp to be clearer and punchier, with a sound that has sparkle and chime indicative of the Black Panel line and perfect for recording situations. The controls are simple and intuitive, and the bias based tremolo circuit has a nice even pulse with a wide range of available speeds. The circuit retains all of the original Schumacher-made transformers with date stamps from’74. The CTS pots have visible date codes from the 24th week of 1974, and the preamp has been professionally recapped with Sprague Orange Drop signal caps and smaller Sprague electrolytics to ensure optimal functionality. The power tubes are a fresh pair of 6V6s from JJ, with JJ-branded preamp tubes and a 5U4 rectifier. The speaker is a ceramic magnet CTS-made driver which has a clean black frame, stock cone and blue foil Fender label on the magnet. The tube chart is also fully intact inside the cabinet. The black tolex and silver sparkle grillcloth with orange stripe are in truly remarkable shape, and the faceplate is practically pristine with its turquoise text and full complement of witch hat knobs. Stock hardware includes the nickel-plated chassis straps and handle caps, as well as the push-in sphinx glides (feet). The original schematic accompanying “P” (for Princeton) stamped envelope is included, along with a modern Fender-branded slip cover.

The dust cover is intended for the Dynakit ST-70 amplifier. Dynakit chassis dimensions – 13″ x 9.5″ base. Dust Cover Dimensions – 13.5″ x 10″ base 7″ height 3/16″ think acrylic. Dust Cover Specifications. 90 degree edge sides. Usage – Don’t run the tube amplifier with the cover on as it will trap the heat that may damage your amp, cover or both. Manufacturing – This dust cover will be hand made by A&B Plastics fabrication located in south Texas. The cover will be made from 3/16 thick acrylic. This is shown in the last three pictures of the post. When removing the paper there will be some slight dust and debris that will need to be wiped off. The dust cover will be very securely packaged and will arrive free of any scratches.

This listing is for the metal cover only which shows signs of wear and age. FIND & FOLLOW CINCY VINTAGE TOYS ON INSTAGRAM AND FACEBOOK FOR OTHER EXCLUSIVE DEALS ON ITEM!

Collector Owned and Never Gigged. Best One Out There. Made in the USA!! Looks, Works, and Sounds Awesome! The Carvin Vintage 16 simply drips tone. The SOAK control takes you from from chiming clean tones with rich midrange presence to a filling upper-midrange snarl that defines its American “Tweed” sound. The modern vintage design incorporates three 12AX7 preamp and two EL84 valves. The power amp in its normal “PENTODE” mode delivers a strident 16 watts RMS of valve output power. Switching to the “TRIODE” mode produces 5 watts of incredibly sweet spongy harmonics, ideal for both mic’d recording and small stage rigs. The sound possibilities are only limited by your fingers and imagination! Output: 16 watts / 5 Watts, Pentode / Triode into 8ohms. 3x 12AX7 Preamp Tubes, 2x EL84 Power Tubes. 1 Meg Passive tone controls for broad adjustment range. Front controls: VOLUME, SOAK, BASS, MID, TREBLE and REVERB. Metal shaft controls, Ivory knobs, Red jewel lamp. Poplar plywood enclosure with Tweed Covering. Carvin TL12-8 12 Speaker. Single 8 ohm speaker jack. CH EQ: 60, 650, & 11.5K Hz. Size: 16 inches wide x 8.5 inches deep x 17.75 inches high. Weight: 14.5 kg. Since 1989 we have had one simple mission: the biggest names at the best prices with service before and after the sale. We have many name brand and used instruments that will accommodate most any budget and we guarantee the lowest possible prices available anywhere on the internet!

Up for sale, a 1962 Fender Princeton in excellent condition and in perfect working order. This genuine vintage Brown Panel era Princeton features a very original 6G2-A circuit. The Princeton has a tone that is very dynamic and warm, with crystalline clean tones giving way to rich, saturated overdrive when turning up the Volume knob. The circuit is as pure and straightforward as they come, and the single Tone knob has a surprisingly wide range. The bias based tremolo circuit has a strong, dimensional pulse and particularly broad range of speeds too. The circuit retains the original pair of Schumacher transformers which date to the 39th (power) and 46th (output) weeks of’61, and the preamp retains all of the original blue molded Ajax tone caps, which have a particularly sweet, musical tonal character. The original Stackpole pots are intact, with visible date codes from the 43rd week of’61. The power supply features a new multi-section can cap, and two smaller Sprague electrolytic caps in the preamp, all ensuring reliable use. The tube complement includes all vintage valves, with a matched pair of vintage JAN 6V6s, a Silvertone-branded (RCA) 5Y3 rectifier, and vintage preamp tubes as well. The speaker is the original gold frame Oxford 10J4 speaker, with a date code on the edge of the frame from the 21st week of’62. The original tube chart is intact, retaining an “LA” date stamp which translates to January of 1962. Cosmetically, this amp features the original rough brown tolex, wheat grillcloth, and the stock leather handle. There’s a bit of light staining and scuffing on the edges of the enclosure, and light patina on the original handle caps and chassis straps. The faceplate is very clean, retaining the original brown barrel knobs. A modern replica Victoria Luggage-style slip cover is included.

This vintage Heathkit W5M amplifier tube cover cage. The cage is made specifically for the W5M model and comes with the Heathkit name badge, The cage is in nice shape for its age and all 4 mounting pins are present. I’ve included photos to show the condition and details of the cage.

This listing is for the metal cover only which shows signs of wear and age. FIND & FOLLOW CINCY VINTAGE TOYS ON INSTAGRAM AND FACEBOOK FOR OTHER EXCLUSIVE DEALS ON ITEM!

Amplifier has been serviced. Parts replaced or repair where needed. On switch not working. Cord has been replaced with on off switch in cord. All other funtions in working order.

Eico HF 20 Amplifier. In nice shape with some surface nicks, light scratches. Amplifier has been serviced. Parts replaced or repair where needed. On switch not working. Cord has been replaced with on off switch in cord. All other funtions in working order. Tubes: mixed USA brands. _gsrx_vers_1516 GS 9.3 (1516).

Please forgive me, Dad, but I have to sell your classic audio equipment! My father was quite an audiophile and left me with some old tube-based components that weigh a ton! I’ve got a Harmon Kardon Award Series, A500 Integrated Stereophonic Tube Amplifier. Transformers are BIG and tubes are in place. All knobs and sliders are original and work. For its age, physical condition is EXCELLENT! Exactly as shown in the pictures. Take a look and let me know if you have any questions. Quite heavy though at 35 pounds. The item “Vintage Harmon Kardon A500 Tube Amplifier withMetal Cover in EXCELLENT condition” is in sale since Friday, September 3, 2021. This item is in the category “Consumer Electronics\Vintage Electronics\Vintage Audio & Video\Vintage Stereo Receivers”. The seller is “oldc399″ and is located in Columbus, Ohio. This item can be shipped to United States.

• Brand: Harman Kardon
• Model: Harmon Kardon A500