Vintage KODAK Projector FS-10-N Mono Tube Amplifier – Quad 6V6, 6J5, 6J7. We do not have the power cord for this unit and were unable to test it. It is in fairly good physical condition with a few small issues we noted: One of the wires is disconnected from a part; one of the parts has some flaking paint. The plastic fuse holder has a crack in it. The bottom of the amplifier does not rest evenly due to part of it being a different depth than the rest (see photos). Due to its age, you should assume it will need some updating/modding. We have included the transformer, which plugs into the amplifier – attached to the transformer are various switches, fuse, and a power plug. Please see all the photos. Uses tubes: (4) 6V6, 6J5, 5Z4, 6J7. All together the parts and amplifier weigh 13 lbs 8 oz. The amplifier measures 12 x 7.25 x approximately 5 high. If you have any concerns or issues with your order, please reach out to us directly before leaving negative or neutral feedback. We are committed to resolving problems quickly and fairly, and we truly value the opportunity to make things right. Your satisfaction is important to us, and we are here to help!

1950′s Vintage Eastman Kodak Co. Tube Type 12AX7 35L6 Pre-Amp Amplifier. Uses 2 12AX7 ECC83, 2 35L6 tubes. 1920, 20s, 1930, 30s, 1940, 40s, 1950, 50s, 1960, 60s, 1970, 70s. Part(s) shown in pictures will be the exact part(s) you will receive.

8 ROLA 6 ohm alnico magnet speaker tests good. All tubes included as pictured: (2) 35L6, 12AY7, 12SL7, and a 12AY7. I’m sure it will need at least new capacitors. This would make a unique one of a kind harp or practice guitar amp. I probably have a dozen similar tube amps that I will be listing in the near future. Amp Base measures: 10″ x 5.5″. Speaker EIA code 285545. Includes everything pictured, speaker & mic with cables, but no power cord. Sorry No Exporting of this item. Not all sellers are created equal. Thanks for Looking and Good Luck.

Tube amplifier using pair 35L6 output tubes with 12ax7 driver. Amp has the schematic diagram on the inside of the bottom cover so it should be easy to convert to a guitar or other audio amplifier as desired. Includes the tubes it came with which are all American made. Thank you for your interest in our listings and have a great day!