Pair Of Triad R-21A Vintage Tube Amplifier Power Transformer #2 Cloth Leads.

Simpson 260 Series 6M Multimeter w/ Leads & Manual-Serviced, Calibrated & Tested. The Simpson 260 Multimeter is an industry “Gold Standard” VOM since introduced in the 1930s and, with its accuracy, is still the preferred choice for testing professionals. This Simpson 260 Series 6M is a winner as it has been serviced, calibrated, and tested by Steve McKinley of Atlanta Tube Amp, who is a Simpson 260 metrologist and a longtime user of the 260. As part of its servicing. Meter needle adjusted to exact zero. The individual components were tested and, if out of spec, replaced. Switches and potentiometers were resoldered, cleaned, and tested. The meter circuit was calibrated to exactly 5K (this is crucial as it impacts the entire meter operation). Meter used to test its own fresh, new Duracell 1.5V and 9V batteries. Tested 10K 1% resistor. Tested known 120VAC source. Tested 500VDC vacuum tube amplifier. Meter calibrated in a “flat position” as that the way it’s intended to be used. The Series 6M is one of Steve’s favorite models as it. Uses the leads with banana jacks. Has the mirrored scale to help prevent parallax error when reading the meter i. User can see when the needle is directly aligned for accurate reading – BIG PLUS. Has the Off / Transit switch position. Is the first model to use the NEDA 13 F “D” cell and NEDA 1604A (9-Volt) battery combination. Has the separate battery / 1-Amp fuse cover. The Adjust-A-View handle supports the meter in a sloping position for easy viewing. Calibration pots for both the meter and A/C voltages. Get this Simson 260 Series 6M that has been serviced, calibrated, and tested before someone else does! Testing leads and a copy of the Operator’s Manual are included.

Vintage HAMMOND H-AO-43-1 Vacuum Tube Amplifier Functional with Power Out Leads. Was tested in its L-100 series organ, everything worked as it should; just before being carefully removed. The intended tubes are. The brown outer shell of the power cord, to the Amplifier, is brittle and broken in spots. Rather or not there are any breaks to the wires insulation, under the brown shell, is not known. Feel free to message any questions, thank you. This item is in the category “Consumer Electronics\Vintage Electronics\Vintage Audio & Video\Vintage Amplifiers & Tube Amps”. The seller is “thomariste0″ and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Belgium, France, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Pakistan, Paraguay, Reunion, Uruguay.

• Brand: Hammond
• Type: Tube Amplifier
• Model: HAMMOND H-AO-43-1
• MPN: H-AO-43-1