For sale is one (1) vintage Ken-Rad 2A3 tube as pictured. The tube’s base is tight and secure with zero movement / looseness. The test results are displayed in the photos New 2A3 Spec 100% = 5,2. See the photos for physical / cosmetic condition. Notes Regarding Tube Tests. All tubes are tested on an Amplitrex AT-1000 tester in the automatic Fixed Bias Mode (for the most conservative results). Test Results are for a general reference only, and are not a guarantee of performance, nor a guarantee of how they will test on your tester. No real world (audio) performance measurements are taken.

PAIR of VTG Sound Valves M40 Mono Tube Power Amplifiers – Dynaco MK IV. The amplifiers are in near mint condition! There are some very minor imperfections. Both amps power up as they should and they work great. The tubes come with the amps. Note this is a matched set w/ consecutive serial numbers! Please be sure to check out my other listings as I will have many other vintage audio and radio-related items up for sale.

Offered for your consideration is a vintage DYNACO STEREO 120A two-channel power amplifier, USA-manufactured c. As you may know, the Dyna Company, later DYNACO, was founded in 1955 by David Hafler and made its name producing quality, affordable vacuum tube amplifiers in factory-assembled and partial kit form. The STEREO 120, or ST 120-the first solid-state amplifier from DYNACO -was introduced in 1965, several years after the technology had become widespread in the audio marketplace. The ST 120 was released after a few years of developments and testing, and only when Hafler felt that it performed as well, and was as dependable, as their venerable tube amplifiers. A 1966 review in Stereophile saw noted audio writer Gordon Holt praise the ST 120, comparing its sound favorably with earlier Dyna tube amplifiers, and also a pair of the renowned Marantz 8B mono tube amps, which put sales of their newest unit on the fast track. Like their tube amps and preamps, the ST 120 was available in partial kit form, and also a factory-wired 120A like the unit shown here. It features a handsome, modestly-sized chassis of chrome-plated steel with fully-perforated, black-enameled steel cover. As on their earlier amps, the 120 model name had meaning; 120 total watts, or 60 watts per channel, which was a significant output level when it was introduced in the mid 1960′s. So, please see my large photos, the specification scan, and read the remaining description to decide if this exceptional DYNACO power amp should be yours. This ST 120A amplifier is in very clean, excellent condition. Adult-owned since new and used sparingly, there are no dents, dings, or scratches on the enclosure. Plus, the chrome shines brilliantly without the tarnish, oxidation, pitting, and even rust seen on many other 120A’s. Also, the lettering is crisp and the power toggle switch works smoothly, glowing a pleasant orange when on. Overall, this DYNACO amp is exceptionally well preserved and presents very nicely. In addition, the original power cord was stiff and cracked, so it was replaced with a new, two-prong grounded plug cord. The interior received a careful dusting and wipe down, and a 1972 date code was noted on one of the huge capacitors giving the likely manufacture date range for the amp. And, since the cover was off, I took the opportunity to take photos of the amp’s interior for your review. Most importantly, the amplifier has been fully tested, receiving signals from my trusted, silver-faced DENON PRA-1000 preamp. Plus, the convenient, side-mounted +/- output terminals are sturdy binding posts, able to accommodate banana plugs, pin terminations, and, of course, raw speaker wire. Lastly, the ST 120A’s durability is legendary with Gordon Holt famously trying to break one during his review testing, and couldn’t! Needless to say, it’s not daunted by driving the most challenging 4? Speakers to their limit. In closing, you’d be hard-pressed to encounter a finer example of the ST 120A. As pictured and described, this splendid DYNACO STEREO 120A power amplifier is offered at a competitive price. What’s more, I don’t know how the unit will be put to use by the new owner, their degree of experience with audio equipment, or the quality/condition of the equipment it will be connected to. This is a well-built amplifier, so I don’t foresee any problems, but nevertheless needed to state the above. And, I’d like you to be the next one! A sturdy box, perhaps two, lined with dense foam panels (and/or other protective materials as I deem fit), will be used to ensure no disappointments upon arrival. Local pick-up is fine, actually preferred, for those in the Chicago-Milwaukee metro area (or farther if you’re willing to make the drive). We’re located about 35 miles north of downtown and some 20 miles south of the WI State line at Kenosha. For international buyers that use a U.

2 Original Vintage Altec 1569A Power Amplifier Badges.

Confirmed power on only, so it is treated as junk. The product contents are everything shown in the images.

This is the mighty H. Scott model LK-150 I picked this item up from the owner of a electronics repair shop. He overhauled the unit replacing all the capacitors and other parts that were needed. He also replaced the power transformer. The original part was no longer available, so he replaced with separate transformers. This unit can crank out 60 watts per channel all day long. I will also include the original build/operating book. Please view pictures if you have any questions please ask. I also have the matching pre amp for sale separately.

Vintage circa 1960′s SCHOBER Transistor Guitar Amplifier TR-2 range of 4-16 ohms 117 VAC. Good vintage condition overall, typical age wear on body but no dents or dings, no missing knobs or dials, power tested and turns on and fan runs (makes a squeaking sound) otherwise untested with use, see photos. Please see photos for closer details and if you have any questions please don’t hesitate to ask.

LARGE LOT NINTY TUBES. POWER OUTPUT AMPLIFIER TUBES. POWER PENTODES ALL 90 TUBES NOS NIB. MADE WITH DOUBLE GETTER BLACK PLATES ONE GETTER SIDE PLATE ONE GETTER TOP OF MICA. VINTAGE TUBES MADE IN THE UNITED STATES. LARGE PILE OF NOS NIB TUBES SAME TYPE. HIGH QIALITY SYLVANIA MADE TUBES FOR TUBE AMPLIFIERS.

Vtg RARE 1950′s GEC UK EL34 Power Amplifier Mullard TUBE PARTRIDGE Transformer. This is believed to be a rare hand built GEC UK EL34 power amplifier with Partridge transformers which looks to be monophonic. The voltage jumper is set to the lowest voltage of 200-210V it does not go lower. Some of the wiring under the power amp has frayed coverings but the wiring and electronics look good with no burns or damp areas. One transformer has electricians tape across the front. The power tubes look to be Mullard EL34 but they are oxidized and assumed not to work.