Eico ST70 Stereo Integrated Tube Amplifier. Is tube amp0 was recently rebuilt and has NOS tubes – everything works perfectly. Released in the early 1960s, this 70-watt (35 watts per channel) classic audio component is highly regarded by audiophiles for its warm tone and robust transformers.
### Vintage Western Electric Tube Power Supply / Amplifier Chassis – Featuring TRANS D-163046. Up for sale is an incredibly rare, untouched vintage Western Electric power supply and amplifier chassis assembly from the late 1940s/1950s Cold War era. Originally engineered for the heavy-duty Bell System long-distance carrier networks, these industrial grey chassis are globally renowned today as the ultimate foundation for building custom luxury tube preamplifiers, phono stages, or mono-block guitar tube amps. This unit is a complete goldmine of original, high-grade Western Electric iron and components that are highly sought after by audiophiles worldwide. #### KEY HIGH-VALUE COMPONENTS INCLUDED. Main Power Transformer: Western Electric TRANS. D-163046 (Legendary nickel-iron Permalloy core with pure copper windings). Network Capacitors: 2x Western Electric GA-50920 Oil-Filled Filter Capacitors. Inductors: Original Western Electric RET (Retardation) Coils / Chokes. Chassis Markings: Beautifully stenciled industrial gray metal frame. #### PHYSICAL & COSMETIC CONDITION. The main chassis is in solid cosmetic shape with clean original factory paint and sharp stenciled labels. However, the capacitor itself remains completely bone-dry with NO oil leaks, and the original internal wiring harness and solder joints remain firmly attached to the terminal pins underneath. The other components, transformer blocks, and terminals are visually intact. Freshly recovered from a closed local estate storage cleanout. This is an incredibly heavy, dense block of industrial steel and copper. We take packaging seriously. This unit will be heavily wrapped in multiple layers of large-cell bubble wrap, packed securely inside a rigid inner box, and then DOUBLE-BOXED into a heavy-duty outer carton lined with thick foam insulation board. It will be bulletproof for transit.
This is a General Electric “Stereo Classic” Model RG-1000 Remote Control Unit, made in Auburn, NY in the early days of home stereo. It’s a passive accessory with ganged volume and balance potentiometers on a 30-foot cord, so you can adjust both from your chair. GE built it for its Stereo Classic tube amplifiers. Per the instructions, it also works with other amps that have a tape or preamp output, or with a pair of mono amps such as the GE PA-20. The unit has a textured aluminum faceplate with chrome trim, ebony knobs and base, and the GE Hi-Fi branding. The cord has its original L/R marker tags, and the yellow factory twist ties are still in place. Tested: Both potentiometers check out with a multimeter, showing smooth, continuous resistance sweep across volume and balance with no open spots. It has not been tested in a live audio system. Condition: Unit is clean, with bright chrome and good faceplate graphics Cord is supple, with no cracks or splits noted Original box shows edge wear, corner tears, and a detached end flap (included) Instruction sheet is complete, with fold wear and light toning, and a small paper loss on the illustration. Supremely Rare in this condition!
This sale is for a. Vintage Roland 1861 Tube Amplifier Powers on Untested. This amplifier has been power on only. No further testing has been done. Tubes glow and light lights. You will receive the exact item shown. Please make sure you look through the pictures.. We are not in on the weekends, so if a question is sent past 5:00 cst Friday we will not be able to reply until Monday. Monday-Friday 9:00 a. NO-DOA (Not Dead on Arrival). These items may be vintage, collectible, or specialty items that we do not have the technical capability to test or repair. Midwest Computer Brokers, Inc. Visit us at mcbia.
Please review all photos closely – they’re considered part of this listing’s description. Brand: Sherwood Electronic Laboratories, Inc. Model: S-1000 II Amplifier (mono integrated tube amp). Serial Number: 6488. Power: 110-120V, 60 Hz, rated 105W. Country of Manufacture: Made in USA. Controls: Selector (Phono A/B/C, Presence, Tape, Scratch Filter, Rumble Filter, Phono Level), Equalization (AES/RIAA/Lon/LP/Ewr/Tape/Mic), Bass, Treble, Loudness (with Loudness In/Out switch), Tape Monitor (Norm/Mon). Output taps: 4 / 8 / 16 ohm speaker terminals. Includes: Amplifier unit only. CONDITION – Untested (Not Powered), Tubes Individually Verified. Tubes were pulled and bench-tested on a Sencore TC142 tube checker: 6L6 tests at 85% emission (GOOD range); 12AX7 tests at 100% emission (GOOD range) – this confirms the tubes themselves are healthy, but does NOT confirm the amplifier circuit, transformers, or capacitors function correctly. Top panel shows significant cosmetic damage: multiple names/initials scratched into the metal finish, plus general scuffing and scratching across the top surface – see photos closely, this is more than typical surface wear. Control knobs show grime/wear consistent with age; front panel lettering and chrome trim otherwise legible and intact. Not inspected for capacitor condition, cord integrity, or continuity beyond the tube bench tests described above. This is tube-era, mains-connected equipment that has not been powered on or serviced. Internal capacitors likely need replacement before use, and high voltages are present inside the chassis once powered. Strongly recommend a full inspection, cap job, and cord check by a qualified tech before first power-up – do not simply plug this in. Model: S-1000 II. Type: Integrated Tube Amplifier (mono). Condition: Used – Untested (Not Powered), Tubes Bench-Verified Good. Country/Region of Manufacture: United States. Items made in America are tariff exempt. Questions welcome before purchasing. Photos are part of the description, please inspect closely. We do our best to accurately photograph the item. Claude AI and Gemini are use to help develop listings. The listing is reviewed by a human to ensure accuracy. However, mistakes are still possible. If you believe there is a mistake or wish to confirm a detail, please send me a message and you will get a reply from a real human! Thank you for purchasing with us!
Vintage BOGEN stereo tube amp. Powered on briefly a few years ago. The pilot light and tubes glowed as expected. No further testing done. Has not been plugged in for at least 4 years. Will be well packed, tubes individually wrapped.
It’s also a sound processor when connected to another cabinet. Only the power amplifier section was tested, as shown in the video. It was tested for many hours without any problems. Tubes are not included. Thank you and good luck SPECIAL NOTE: Temporary connections were made for testing purposes, including the power cord. You will receive it with these connections.
