Dynaco Mark VI Vintage Monoblock Tube Amplifier Pair, 120W

Wednesday, November 24th, 2021
Dynaco Mark VI Vintage Monoblock Tube Amplifier Pair, 120W

Dynaco Mark VI Vintage Monoblock Tube Amplifier Pair, 120W

Dynaco Mark VI Vintage Monoblock Tube Amplifier Pair, 120W

Dynaco Mark VI Vintage Monoblock Tube Amplifier Pair, 120W

Dynaco Mark VI Vintage Monoblock Tube Amplifier Pair, 120W

Dynaco Mark VI Vintage Monoblock Tube Amplifier Pair, 120W

Dynaco Mark VI Vintage Monoblock Tube Amplifier Pair, 120W

Dynaco Mark VI Vintage Monoblock Tube Amplifier Pair, 120W

Dynaco Mark VI Vintage Monoblock Tube Amplifier Pair, 120W

Dynaco Mark VI Vintage Monoblock Tube Amplifier Pair, 120W

Dynaco Mark VI Vintage Monoblock Tube Amplifier Pair, 120W

Dynaco Mark VI Vintage Monoblock Tube Amplifier Pair, 120W

No mid-fi, no gimmicks, no junk. Each piece of equipment is cosmetically restored and fully tested in our well-equipped lab by an engineer with 30+ years of experience in the HiFi world. Through our sister company, which is an authorized dealer for McIntosh, Audio Research, Sonus Faber, ClearAudio, Project, and Sony ES, we have access to OEM parts, service, and support. This listing is for a working set of Mark VI Monoblocks in working condition. Features rare XLR inputs for an amplifier this age. Cool bias meter on the front with rack handles. This pair of amplifiers is labeled “Dynaco Wired”, however they have underwent a significant modification at some point in the past. The majority of the electrolytic capacitors were replaced, film bypass capacitors were added to the various power supply rails, and slow start relay circuits were added to delay the B+ voltages. Other modifications may have been performed that we are unaware of that sharp Dynaco aficionados may recognize. Both amplifiers were tested to their rated power of 120W. Both meter lamps and meters are working properly. Tubes include RCA 7199, and a mix Sylvania and Philips USA 8417. Please see our pictures for overall condition. The Mark VI is a vacuum tube high power basic power amplifier designed for the professional sound installer. Vacuum tubes are most often favored in their ability to withstand enormous physical and electrical abuse – conditions frequently encountered in discotheques, public address and musical instrument applications. Its rugged construction and utilization of superior components, including the patented Dynaco Super Fidelity transformers, permit continuous duty at full power, while maintaining safe operating margins. Protective isolation of the load from the driving circuits, and uniform power output into a variety of load impedances are inherent in all designs which use an impedance matching transformer. The Mark VI employs a basic circuit arrangement which all Dynaco vacuum tube amplifiers have used since the inception of the Mark II amplifier in 1955. Refinements of the operating parameters have been incorporated for circuit balance, stability, and for drive capability. The components used have been selected to protect against failure, and all parts are operated conservatively to assure superior performance and proper operation for many years. The SkyFi Testing Process for Tube Amplifiers. We start with a visual inspection of all internal components to make sure there are no signs of stress or aging. Capacitors are checked for telltale sings of bulging or leaking, resistors are checked for signs of overheating or cracking, and tubes are inspected for signs of stress overheating or cracking. We then power up the unit carefully and run a simple 1k sine wave while monitoring the output on an oscilloscope for signs of distortion or noise. Finally we run the amplifier to its full rated power into the appropriate resistive load provided by our Sencore amplifier tester. If there is an issue, it will usually be noticeable at this point. If it all looks clean we will often test for THD (Total Harmonic Distortion) measured by our Keithley distortion meter, and compare it against the original manufacturers specifications. The amplifier the remains powered on to “burn in” on our test bench for a few hours to make sure there are no heat related issues. If there are balanced inputs available they will also be tested. We also test all tubes for output gain and leakage on our calibrated modern and professional tube tester against the original manufacturers specifications. If needed, the tubes will be replaced from our vast NOS (New Old Stock) vintage or modern inventory. Final testing involves pushing actual music thorough the amplifier. We’ve learned over time that some issues are only noticeable to a trained ear while listening to familiar source material. Our test bench has reference vintage KEF speakers that we’re very familiar with which quickly reveal any discrepancies. Some amplifiers will then move into our listening room where they are tested with our in-house reference speakers of choice. 120 watts into 8 (mono). 10 Hz to 40 kHz. Signal to noise ratio. 4 x 8417, 1 x 7199. 19 x 10.5 x 8.75 inches. We have too many items for sale and its nearly impossible to keep track of offers outside of the official system. We accept trade-ins of equal or lesser value under certain conditions. Please visit our website to submit your gear for full consideration. We will only consider high-end equipment from mainstream manufacturers such as McIntosh, Mark Levinson, Audio Research, Krell, etc. And will typically pass on displays, projectors, receivers, dated surround processors, and mid-fi equipment of any type. We will offer a fair value for your equipment, but keep in mind were running a business and will need to be able to resell the equipment at a profit after investing a great deal of time and resources in testing, certifying, repairing, cleaning, and packaging the incoming equipment. SELL US YOUR GEAR (Working or Broken). Simply visit our website to submit your gear for full consideration. We are currently operating from our shop inside our dedicated building in Glen Rock, NJ. We have several well-equipped and dedicated listening areas, plus a dedicated listening studio with tons of equipment of all makes and models. Were not a store, so please dont make an appointment if youre just curious as to how a speaker or piece of equipment sounds. In essence – no tire kickers please. This is super useful when purchasing large speakers or heavy amplifiers. Its also great for ensuring your new turntable is setup correctly in its final resting place. The item “Dynaco Mark VI Vintage Monoblock Tube Amplifier Pair, 120W” is in sale since Tuesday, November 16, 2021. This item is in the category “Consumer Electronics\Vintage Electronics\Vintage Audio & Video\Vintage Amplifiers & Tube Amps”. The seller is “skyfiaudio” and is located in Glen Rock, New Jersey. This item can be shipped to United States.
  • Brand: Dynaco
  • Type: Tube Amplifier
  • MPN: Mark VI
  • Model: Mark VI
  • Country/Region of Manufacture: United States

Vintage Dynaco Dynakit Mark IV Monoblock Tube Amplifier For Parts Or Repair

Sunday, November 21st, 2021
Vintage Dynaco Dynakit Mark IV Monoblock Tube Amplifier For Parts Or Repair

Vintage Dynaco Dynakit Mark IV Monoblock Tube Amplifier For Parts Or Repair

Vintage Dynaco Dynakit Mark IV Monoblock Tube Amplifier For Parts Or Repair

Vintage Dynaco Dynakit Mark IV Monoblock Tube Amplifier For Parts Or Repair

Vintage Dynaco Dynakit Mark IV Monoblock Tube Amplifier For Parts Or Repair

Vintage Dynaco Dynakit Mark IV Monoblock Tube Amplifier For Parts Or Repair

Vintage Dynaco Dynakit Mark IV Monoblock Tube Amplifier. For Parts Or Repair Only. Please refer to the photos provided for more details on items physical condition. Vintage Dynaco Dynakit Mark IV Monoblock Tube Amplifier For Parts Or Repair. Check out our entire store for more great products and deals! We do however make every possible attempt to accurately describe the inventory we sell and stand behind it. Since 2016, 8TEN Industries has been a leading asset recovery provider supporting national retailers, brands, and manufacturers. Our 60,000 square foot processing and distribution facility located in Cass City, Michigan has allowed us to become industry leader in turning difficult problems for manufacturers into great deals for our customers. The item “Vintage Dynaco Dynakit Mark IV Monoblock Tube Amplifier For Parts Or Repair” is in sale since Sunday, November 14, 2021. This item is in the category “Consumer Electronics\Vintage Electronics\Vintage Audio & Video\Vintage Amplifiers & Tube Amps”. The seller is “8ten1944″ and is located in Cass City, Michigan. This item can be shipped to United States.
  • Brand: Dynaco
  • MPN: Does Not Apply

1986 Mesa Boogie Mark III Red Stripe Vintage Tube Amp Half Stack White, EVM 12L

Wednesday, November 17th, 2021
1986 Mesa Boogie Mark III Red Stripe Vintage Tube Amp Half Stack White, EVM 12L

1986 Mesa Boogie Mark III Red Stripe Vintage Tube Amp Half Stack White, EVM 12L

1986 Mesa Boogie Mark III Red Stripe Vintage Tube Amp Half Stack White, EVM 12L

1986 Mesa Boogie Mark III Red Stripe Vintage Tube Amp Half Stack White, EVM 12L

1986 Mesa Boogie Mark III Red Stripe Vintage Tube Amp Half Stack White, EVM 12L

1986 Mesa Boogie Mark III Red Stripe Vintage Tube Amp Half Stack White, EVM 12L

1986 Mesa Boogie Mark III Red Stripe Vintage Tube Amp Half Stack White, EVM 12L

1986 Mesa Boogie Mark III Red Stripe Vintage Tube Amp Half Stack White, EVM 12L

1986 Mesa Boogie Mark III Red Stripe Vintage Tube Amp Half Stack White, EVM 12L

1986 Mesa Boogie Mark III Red Stripe Vintage Tube Amp Half Stack White, EVM 12L

1986 Mesa Boogie Mark III Red Stripe Vintage Tube Amp Half Stack White, EVM 12L

1986 Mesa Boogie Mark III Red Stripe Vintage Tube Amp Half Stack White, EVM 12L

Up for sale, a 1986 Mesa Boogie Mark III “Red Stripe” Simul-Class head and matching 4×12 speaker cabinet in excellent condition and in perfect working order. The third iteration of the Mark III’s evolution, this long box Mesa head features original white bronco tolex and the tell-tale red mark on the back of the chassis above the power cable noting the factory tweaks made to this particular Mesa, namely that the lead mode circuitry is almost identical to the IIC+, and some minor component substitutions in preamp also bring it closer to the IIC+. Everything from bold cleans to raw, aggressive overdrive to thick crunch is available from the Mark III with every push pull option and trick in the book for maximum versatility and tonal tweakage. The circuit is extremely original, professionally recapped with Sprague Atom filter caps as needed and retaining the original Schumacher transformers which date to’86, along with the stock fan and reverb pan. The amp is stocked with a matched quad of Sovtek 5881 (6L6GC) power tubes with five EH preamp tubes. The speaker cabinet is loaded with the original quad of Electro Voice 12L heavy duty speakers with extremely clean frames and original cones. Cosmetically, this is a clean and complete set, and the head retains all original knobs and slider tips. The white bronco tolex shows only minor wear on the enclosure edges, and the original hardware and faceplate are very well-kept. Both original footswitches are included. Check out our shop “Mike & Mike’s Guitar Bar, ” and please let us know if we can answer any questions! We use double thick boxes, 1″ foam, and industrial 1/2″ bubble wrap to ensure that your amp arrives safely. International orders will be declared as merchandise, and the value of merchandise will be declared as the amount paid. We cannot declare anything as a gift or for a lesser value. We do our best to describe all items with honesty and accuracy, but to be sure, please. The item “1986 Mesa Boogie Mark III Red Stripe Vintage Tube Amp Half Stack White, EVM 12L” is in sale since Wednesday, October 27, 2021. This item is in the category “Musical Instruments & Gear\Guitars & Basses\Guitar Amplifiers”. The seller is “mmguitarbar” and is located in Seattle, Washington. This item can be shipped worldwide.
  • Number of Channels: 3
  • Number of Speakers: 4
  • Model: Mark III Red Stripe
  • Country/Region of Manufacture: United States
  • Venue Type: Performance
  • Amplifier Technology: Vacuum Tube
  • Amplifier Type: Stack
  • Brand: Mesa Boogie
  • Suitable For: Electric Guitar

Mint Vintage Dynakit Dynaco Mark II Monoblock Mullard Tube Amplifier

Thursday, June 24th, 2021
Mint Vintage Dynakit Dynaco Mark II Monoblock Mullard Tube Amplifier

Mint Vintage Dynakit Dynaco Mark II Monoblock Mullard Tube Amplifier

Mint Vintage Dynakit Dynaco Mark II Monoblock Mullard Tube Amplifier

Mint Vintage Dynakit Dynaco Mark II Monoblock Mullard Tube Amplifier

Mint Vintage Dynakit Dynaco Mark II Monoblock Mullard Tube Amplifier

Mint Vintage Dynakit Dynaco Mark II Monoblock Mullard Tube Amplifier

Mint Vintage Dynakit Dynaco Mark II Monoblock Mullard Tube Amplifier

Mint Vintage Dynakit Dynaco Mark II Monoblock Mullard Tube Amplifier

Mint Vintage Dynakit Dynaco Mark II Monoblock Mullard Tube Amplifier

Mint Vintage Dynakit Dynaco Mark II Monoblock Mullard Tube Amplifier

Mint Vintage Dynakit Dynaco Mark II Monoblock Mullard Tube Amplifier

We Strive for 5 Star Feedback and 100% satisfied buyers. Brick Audio strives to list only the best in audio equipment and accessories. This is a mint Dynakit Dynaco monoblock amplifier in perfect working condition. The item “Mint Vintage Dynakit Dynaco Mark II Monoblock Mullard Tube Amplifier” is in sale since Sunday, December 13, 2020. This item is in the category “Consumer Electronics\Vintage Electronics\Vintage Audio & Video\Vintage Amplifiers & Tube Amps”. The seller is “brickaudio77″ and is located in Little Neck, New York. This item can be shipped to United States, Canada, United Kingdom, Germany, Japan, France, Australia, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, Sweden, South Korea, Indonesia, Taiwan, South africa, Belgium, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, Israel, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Pakistan, Paraguay, Reunion, Uruguay.
  • Model: Dynakit Mark II
  • Modified Item: No
  • Custom Bundle: No
  • Type: Tube Amplifier
  • MPN: Does Not Apply
  • Brand: Dynaco

Vintage DYNACO MARK IV MONO TUBE AMP DYNAKIT MK 4 untested

Friday, December 25th, 2020
Vintage DYNACO MARK IV MONO TUBE AMP DYNAKIT MK 4 untested

Vintage DYNACO MARK IV MONO TUBE AMP DYNAKIT MK 4 untested

Vintage DYNACO MARK IV MONO TUBE AMP DYNAKIT MK 4 untested

Vintage DYNACO MARK IV MONO TUBE AMP DYNAKIT MK 4 untested

Vintage DYNACO MARK IV MONO TUBE AMP DYNAKIT MK 4 untested

Vintage DYNACO MARK IV MONO TUBE AMP DYNAKIT MK 4 untested

This amp is untested. Metal base is tarnished. Power cord in good condition. Hip wt 32 lbs. The item “Vintage DYNACO MARK IV MONO TUBE AMP DYNAKIT MK 4 untested” is in sale since Tuesday, December 22, 2020. This item is in the category “Consumer Electronics\Vintage Electronics\Vintage Audio & Video\Vintage Amplifiers & Tube Amps”. The seller is “cubkiid99″ and is located in Terryville, Connecticut. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Pakistan, Paraguay, Reunion, Uruguay.
  • Model: Mark IV 40watts Audio Power Output
  • Modified Item: No
  • Country/Region of Manufacture: United States
  • Custom Bundle: No
  • California Prop 65 Warning: none
  • Type: mono amplifier
  • MPN: mark iv
  • Brand: Dynaco

Vintage PAIR Dynakit Mark Mk IV Mono Tube Amps Amplifiers UNTESTED Minus 2 Tubes

Monday, December 21st, 2020
Vintage PAIR Dynakit Mark Mk IV Mono Tube Amps Amplifiers UNTESTED Minus 2 Tubes

Vintage PAIR Dynakit Mark Mk IV Mono Tube Amps Amplifiers UNTESTED Minus 2 Tubes

Vintage PAIR Dynakit Mark Mk IV Mono Tube Amps Amplifiers UNTESTED Minus 2 Tubes

Vintage PAIR Dynakit Mark Mk IV Mono Tube Amps Amplifiers UNTESTED Minus 2 Tubes

Vintage PAIR Dynakit Mark Mk IV Mono Tube Amps Amplifiers UNTESTED Minus 2 Tubes

Vintage PAIR Dynakit Mark Mk IV Mono Tube Amps Amplifiers UNTESTED Minus 2 Tubes

Vintage PAIR Dynakit Mark Mk IV Mono Tube Amps Amplifiers UNTESTED Minus 2 Tubes

Vintage PAIR Dynakit Mark Mk IV Mono Tube Amps Amplifiers UNTESTED Minus 2 Tubes

Vintage PAIR Dynakit Mark Mk IV Mono Tube Amps Amplifiers UNTESTED Minus 2 Tubes

Vintage PAIR Dynakit Mark Mk IV Mono Tube Amps Amplifiers UNTESTED Minus 2 Tubes

Vintage PAIR Dynakit Mark Mk IV Mono Tube Amps Amplifiers UNTESTED Minus 2 Tubes

Vintage PAIR Dynakit Mark Mk IV Mono Tube Amps Amplifiers UNTESTED Minus 2 Tubes Looks complete except for 2. Tubes on one of the amps. Info found on the web. The Mark IV Amplifier uses a circuit arrangement based on that of the Dynakit’s Mark II and Mark III which have become world famous for superior quality while essentially simple and trouble free. The new 7199 tube is used as a pentode high gain voltage amplifier directly coupled to a cathodyne phase inverter. All parameters are adjusted for minimum distortion. This type of phase inverter has the unique advantage that its operation is independent of tube ageing so that no adjustments are required in maintaining optimum performance. An internal capacitive feedback loop balances the phase inverter at the highest frequencies, and the arrangement provides accurately balanced driving signals to the output tubes, which are EL-34′s operated well below their maximum ratings. The output tubes use a fixed bias arrangement which is set through use of Dyna Biaset (patent pending) which provides optimum linearity of the tubes and minimizes the effects of unbalanced components. The connection of the output tubes includes a small percentage of screen loading which improves the regulation of the output stage and makes it comparatively uncritical of load impedance. Power output: 40 watts into 8 (mono) (EACH). Frequency response: 20Hz to 20kHz. Total harmonic distortion: 1%. Input sensitivity: 1.3V. Signal to noise ratio: 90dB. Speaker load impedance: 4 to 16. Valve complement: 2 x EL-34, 1 x 7199, 1 x GZ-34, 1 x selenium rectifier. Dimensions: 5 x 14 x 6.5 inches. I do not have the proper equipment to test a tube pre-amp and do not want to risk applying power to a 60 year old unit. Previous units that I acquired from the same audiophile collection have proven to be in very good condition. He did not own junk. See pics for details. Will be carefully packed in a sturdy box with ample packaging. On all 6 sides. The Last picture is an example of how I pack these (with Styrofoam on the top and bottom as well as the sides shown). It is located in Simi Valley, CA. Just 40 miles north of Los Angeles. The item “Vintage PAIR Dynakit Mark Mk IV Mono Tube Amps Amplifiers UNTESTED Minus 2 Tubes” is in sale since Friday, December 18, 2020. This item is in the category “Consumer Electronics\Vintage Electronics\Vintage Audio & Video\Vintage Preamps & Tube Preamps”. The seller is “normajewels” and is located in Simi Valley, California. This item can be shipped to United States.
  • MPN: Mark IV
  • Brand: Dynaco

1970s Mitchell Pro-100 Vintage 100 Watt Tube Guitar Amp Head, Boogie Mark I

Thursday, July 30th, 2020
1970s Mitchell Pro-100 Vintage 100 Watt Tube Guitar Amp Head, Boogie Mark I

1970s Mitchell Pro-100 Vintage 100 Watt Tube Guitar Amp Head, Boogie Mark I

1970s Mitchell Pro-100 Vintage 100 Watt Tube Guitar Amp Head, Boogie Mark I

1970s Mitchell Pro-100 Vintage 100 Watt Tube Guitar Amp Head, Boogie Mark I

1970s Mitchell Pro-100 Vintage 100 Watt Tube Guitar Amp Head, Boogie Mark I

1970s Mitchell Pro-100 Vintage 100 Watt Tube Guitar Amp Head, Boogie Mark I

1970s Mitchell Pro-100 Vintage 100 Watt Tube Guitar Amp Head, Boogie Mark I

1970s Mitchell Pro-100 Vintage 100 Watt Tube Guitar Combo Amp, exact schematic to Boogie Mark I, built in 1977. This was built by the same guy who put out ” how to service your own tube amp” book and video back in the 80′s. THIS AMP IS HEAVY, BUILT LIKE A tANK. The item “1970s Mitchell Pro-100 Vintage 100 Watt Tube Guitar Amp Head, Boogie Mark I” is in sale since Monday, September 16, 2019. This item is in the category “Musical Instruments & Gear\Vintage Musical Instruments\Vintage Guitars & Basses\Guitar Amplifiers”. The seller is “my3rdjob2011″ and is located in Fort Wayne, Indiana. This item can be shipped to United States.
  • Model: Mark1
  • Exact Year: 1977
  • MPN: Does Not Apply
  • Brand: Mitchell Boogie

Dynakit MK III Vintage Monoblock Amplifier Dynaco Mark 3 Tube Amp MK3 Working

Wednesday, July 1st, 2020
Dynakit MK III Vintage Monoblock Amplifier Dynaco Mark 3 Tube Amp MK3 Working

Dynakit MK III Vintage Monoblock Amplifier Dynaco Mark 3 Tube Amp MK3 Working

Dynakit MK III Vintage Monoblock Amplifier Dynaco Mark 3 Tube Amp MK3 Working

Dynakit MK III Vintage Monoblock Amplifier Dynaco Mark 3 Tube Amp MK3 Working

Dynakit MK III Vintage Monoblock Amplifier Dynaco Mark 3 Tube Amp MK3 Working

Dynakit MK III Vintage Monoblock Amplifier Dynaco Mark 3 Tube Amp MK3 Working

Dynakit MK III Vintage Monoblock Amplifier Dynaco Mark 3 Tube Amp MK3 Working

Dynakit MK III Vintage Monoblock Amplifier Dynaco Mark 3 Tube Amp MK3 Working

Dynakit MK III Vintage Monoblock Amplifier Dynaco Mark 3 Tube Amp MK3 Working

Dynakit MK III Vintage Monoblock Amplifier Dynaco Mark 3 Tube Amp MK3 Working

Dynakit MK III Vintage Monoblock Amplifier Dynaco Mark 3 Tube Amp MK3 Working

Packed and insured by the carrier for safe arrival. The item “Dynakit MK III Vintage Monoblock Amplifier Dynaco Mark 3 Tube Amp MK3 Working” is in sale since Sunday, May 24, 2020. This item is in the category “Consumer Electronics\Vintage Electronics\Vintage Audio & Video\Vintage Amplifiers & Tube Amps”. The seller is “behmjaydarren” and is located in Lincoln, Nebraska. This item can be shipped to United States.
  • Brand: Dynaco
  • Type: Tube Amplifier

1970s Traynor YBA-1 Bass Master Mark II Vintage Tube Guitar Amp Head, Serviced

Wednesday, June 17th, 2020
1970s Traynor YBA-1 Bass Master Mark II Vintage Tube Guitar Amp Head, Serviced

1970s Traynor YBA-1 Bass Master Mark II Vintage Tube Guitar Amp Head, Serviced

1970s Traynor YBA-1 Bass Master Mark II Vintage Tube Guitar Amp Head, Serviced

1970s Traynor YBA-1 Bass Master Mark II Vintage Tube Guitar Amp Head, Serviced

1970s Traynor YBA-1 Bass Master Mark II Vintage Tube Guitar Amp Head, Serviced

1970s Traynor YBA-1 Bass Master Mark II Vintage Tube Guitar Amp Head, Serviced

1970s Traynor YBA-1 Bass Master Mark II Vintage Tube Guitar Amp Head, Serviced

1970s Traynor YBA-1 Bass Master Mark II Vintage Tube Guitar Amp Head, Serviced

1970s Traynor YBA-1 Bass Master Mark II Vintage Tube Guitar Amp Head, Serviced

1970s Traynor YBA-1 Bass Master Mark II Vintage Tube Guitar Amp Head, Serviced

1970s Traynor YBA-1 Bass Master Mark II Vintage Tube Guitar Amp Head, Serviced

Up for sale, a 1970′s Traynor YBA-1 Bass Master Mark II tube amplifier head in excellent condition and in perfect working order. Fully serviced and very original, this head drives a matched pair of EL34 power tubes, generating an ample 45 watts. Made in Canada and fully hand-wired with giant Hammond transformers, this amp has significant clean headroom and passes a ton of low end. Known as the poor mans Marshall, the circuit can be easily modified to that of a classic 4-input design, yet in its stock configuration the YBA-1 can already harness that rich Tweed-meets-U. Blend which is this Traynor’s sonic signature. With Volume controls for each channel as well as a global EQ, this amp can be used to power a variety of different instruments (such as a bevy of vintage keyboards) or simply a single guitar or bass, providing a bold, clean power amp that works well with effects pedals. This Traynor has abundant low end response, and the large transformers keep the sound tight and full. This YBA-1 has a very original circuit, with all of the original Hammond transformers and a preamp that retains all of the original pots as well as the mustard tone caps which are essential to the tonal color of this head. The power supply includes new F&T capacitors to ensure optimal performance. The amp is currently loaded with a trio of vintage 12AX7 (7025) preamp tubes as well as a matched pair of Sylvania EL34 power tubes. The faceplate retains all of its original knobs, with most of the white screenprinting having been worn away. Smooth black tolex and a silver grill cloth cover the enclosure, with a good deal of scuffing and wear throughout, and there is evidence of black paint on the enclosure, specifically over the chrome bumpers. This Traynor lives up to the company’s reputation of delivering sturdy workhorse amps that perform reliably on stage and in studio situations. This vintage hand-wired Traynor YBA-1 Bass Master Mark II is a true sleeper that has been well played, but remains in top-notch performance condition. Check out our shop “Mike & Mike’s Guitar Bar, ” and please let us know if we can answer any questions! We use double thick boxes, 1″ foam, and industrial 1/2″ bubble wrap to ensure that your amp arrives safely. International orders will be declared as merchandise, and the value of merchandise will be declared as the amount paid. We cannot declare anything as a gift or for a lesser value. We do our best to describe all items with honesty and accuracy, but to be sure, please. The item “1970s Traynor YBA-1 Bass Master Mark II Vintage Tube Guitar Amp Head, Serviced” is in sale since Friday, May 8, 2020. This item is in the category “Musical Instruments & Gear\Guitars & Basses\Guitar Amplifiers”. The seller is “mmguitarbar” and is located in Seattle, Washington. This item can be shipped worldwide.
  • Number of Channels: 2
  • Model: YBA-1 Bass Master Mark II
  • Country/Region of Manufacture: Canada
  • Amplifier Technology: Vacuum Tube
  • MPN: Does Not Apply
  • Compatible Guitar: Electric Guitar Amplifier
  • Amplifier Type: Head
  • Brand: Traynor
  • Suitable For: Performance

Bell Mark 40 Vintage PA Tube Amp Amplifier Guitar Project

Thursday, May 7th, 2020
Bell Mark 40 Vintage PA Tube Amp Amplifier Guitar Project

Bell Mark 40 Vintage PA Tube Amp Amplifier Guitar Project

Bell Mark 40 Vintage PA Tube Amp Amplifier Guitar Project

Bell Mark 40 Vintage PA Tube Amp Amplifier Guitar Project

Bell Mark 40 Vintage PA Tube Amp Amplifier Guitar Project

Bell Mark 40 Vintage PA Tube Amp Amplifier Guitar Project

Bell Mark 40 Vintage PA Tube Amp Amplifier Guitar Project; Untested as I do not have a variac to bring it up safely. One array of tubes not installed. The item “Bell Mark 40 Vintage PA Tube Amp Amplifier Guitar Project” is in sale since Sunday, October 27, 2019. This item is in the category “Musical Instruments & Gear\Vintage Musical Instruments\Vintage Guitars & Basses\Guitar Amplifiers”. The seller is “aldervista” and is located in Columbus, Ohio. This item can be shipped to United States, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Costa rica, Dominican republic, Panama, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Turks and caicos islands, Bangladesh, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Luxembourg, Monaco, Macao, Martinique, Nicaragua, Peru, Pakistan, Paraguay, Viet nam, Uruguay, Russian federation, Canada, Chile, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica.
  • Model: Mark 40
  • Brand: Bell