Vintage Tube Amp

CLASSIC 20 112 COMBO GUITAR AMPLIFIER. Introducing the new Peavey Classic 20 watt 112 combo with an all-tube preamp and power amp, providing the distinctive sonic punch of the larger, iconic amplifiers on which it is based, but in a more compact footprint (7.25″ x 14″ x 7.75/185mm x 356mm x197mm) weighing significantly less (34.7 lbs/15.7 kg). This latest addition brings new life into the legendary product line by now providing players that iconic tone in a package better accommodating to today’s smaller stage and bedroom performances. Boasting two channels that mirror the same voicing and gain structure of its bigger Peavey amplifier siblings, in addition to a specially designed boost function, the Classic 20 112 Combo is a versatile, powerful unit that is equally suitable to virtually all musical styles. Two EL84 power tubes and three 12AX7/ECC83 preamp tubes deliver the rich, warm tube-amplifier tones that are so sought after by players and engineers. Each of the Peavey Classic 20 112 Combo’s channels shares EQ, an effects loop, and reverb (all footswitchable), while the amp’s rear panel features Microphone Simulated Direct Interface (MSDI) with XLR output and USB out, 3-position power attenuator switch allowing for 20 watt, 5 watt or 1 watt operation, and speaker defeat switch. The Classic 20 112 Combo’s front panel includes a ¼ INPUT jack, VOLUME knob, CHANNEL switch for selection of’LEAD’ or’RHYTHM’ channels, PRE-GAIN to control the input level of the lead channel i. Overdrive and gain, POST GAIN to balance the sound between the two channels, BASS, MIDDLE, & TREBLE EQ controls, REVERB to dial in the amount of ambience, a Pilot Light indicating when AC power is being supplied and the Classic 20 112 Combo’s POWER SWITCH is in the “ON” position, STANDBY switch, and OUTPUT TUBE STATUS INDICATION T. LEDS that illuminate red or green, depending on the status of the output tube they are monitoring. 2x EL84 power tubes and 3x 12AX7/ECC83 preamp tubes. Two footswitchable channels with three-band EQ. Footswitchable volume boost on both channels. Footswitchable buffered effects Loop. Tube Status Indication T. Impedance switch for 16 or 8 ohm cabinets. MSDIT Output with XLR and ground lift switch. Attenuator switch for 20 watts, 5 watts or 1 watt output power. Single 16 Ohm Peavey Sheffield 1230+. Weight Packed: 38.58 lb(17.5 kg). Width Packed: 22.2(56.388 cm). Height Packed: 23.8(60.452 cm). Depth Packed: 13.8(35.052 cm).

CLASSIC 20 112 COMBO GUITAR AMPLIFIER. Introducing the new Peavey Classic 20 watt 112 combo with an all-tube preamp and power amp, providing the distinctive sonic punch of the larger, iconic amplifiers on which it is based, but in a more compact footprint (7.25″ x 14″ x 7.75/185mm x 356mm x197mm) weighing significantly less (34.7 lbs/15.7 kg). This latest addition brings new life into the legendary product line by now providing players that iconic tone in a package better accommodating to today’s smaller stage and bedroom performances. Boasting two channels that mirror the same voicing and gain structure of its bigger Peavey amplifier siblings, in addition to a specially designed boost function, the Classic 20 112 Combo is a versatile, powerful unit that is equally suitable to virtually all musical styles. Two EL84 power tubes and three 12AX7/ECC83 preamp tubes deliver the rich, warm tube-amplifier tones that are so sought after by players and engineers. Each of the Peavey Classic 20 112 Combo’s channels shares EQ, an effects loop, and reverb (all footswitchable), while the amp’s rear panel features Microphone Simulated Direct Interface (MSDI) with XLR output and USB out, 3-position power attenuator switch allowing for 20 watt, 5 watt or 1 watt operation, and speaker defeat switch. The Classic 20 112 Combo’s front panel includes a ¼ INPUT jack, VOLUME knob, CHANNEL switch for selection of’LEAD’ or’RHYTHM’ channels, PRE-GAIN to control the input level of the lead channel i. Overdrive and gain, POST GAIN to balance the sound between the two channels, BASS, MIDDLE, & TREBLE EQ controls, REVERB to dial in the amount of ambience, a Pilot Light indicating when AC power is being supplied and the Classic 20 112 Combo’s POWER SWITCH is in the “ON” position, STANDBY switch, and OUTPUT TUBE STATUS INDICATION T. LEDS that illuminate red or green, depending on the status of the output tube they are monitoring. 2x EL84 power tubes and 3x 12AX7/ECC83 preamp tubes. Two footswitchable channels with three-band EQ. Footswitchable volume boost on both channels. Footswitchable buffered effects Loop. Tube Status Indication T. Impedance switch for 16 or 8 ohm cabinets. MSDIT Output with XLR and ground lift switch. Attenuator switch for 20 watts, 5 watts or 1 watt output power. Single 16 Ohm Peavey Sheffield 1230+. Weight Packed: 38.58 lb(17.5 kg). Width Packed: 22.2(56.388 cm). Height Packed: 23.8(60.452 cm). Depth Packed: 13.8(35.052 cm).

Crate Palomino V32 Vintage-Style Guitar Tube Combo Amplifier Amp Beige w/ Foot Switch – AS-IS READ. Tested and Confirmed Functional. Internal speaker outputs loud and clear audio. Line input is functional. All amplifier effects and controls operate as expected (spring reverb, clean/overdrive, tone controls). Footswitch controls respond correctly. Unit powers on and functions during basic testing. Intermittent static/crackling present from internal speaker when idle (no input signal). Line output signal tested weak; signal is extremely faint when connected to a mixer or external effects pedal. To hear the line out, both the instrument’s output gain and the V32′s volume must be raised well above typical levels. Internal speaker was disconnected during testing to prevent excess volume from routing simultaneously. Amplifier housing and control knobs become noticeably warm during use; heat was also observed through top ventilation. Proper operating temperature is unknown. No further troubleshooting, diagnostics, or repairs have been performed. There is no guarantee of functionality beyond what is described here. Standard signs of use. May have cosmetic wear and/or scuffs. Some stains and small tears on cabinet. See photos for more detail. Includes only what is pictured. Does not include any additional components. R2v3 CATEGORY C4/F3 NON-DATA.