Vintage Tube Amp

All items in my store are 100% authentic. Please contact me if you have any questions. About Importer’s Obligation. We do not mark merchandise values below value or mark items as “gifts” – US and International government regulations prohibit such behavior. Thank you for your understanding. This item is in the category “Consumer Electronics\Vintage Electronics\Vintage Audio & Video\Vintage Amplifiers & Tube Amps”. The seller is “kj-japan” and is located in this country: JP. This item can be shipped worldwide.

• Brand: Sansui
• Serial number: 606078858
• Type: Tube Amplifier
• SNR: 115dB or more
• Custom Bundle: No
• Model: AU-X111MOS VINTAGE
• Power consumption (W): 350W
• impedance: 4 to 16Ω
• MPN: AU-X111MOS VINTAGE
• Frequency response: DC to 300kHz +0 -3dB
• Modified Item: No
• Rated output: 150W+150W(6Ω) 110W+110W(8Ω)

Amp is clean and works well. All tubes tested and replaced as needed. Has RCA 6V6 power tubes. The 12AX7s and 12AT7s are Fender. Original 12 CTS speaker dates to 1976. Has original cone and tested good. Has push/pull gain boost. Amp looks all original including caps. Made in Fullerton California, USA. This item is in the category “Musical Instruments & Gear\Guitars & Basses\Guitar Amplifiers”. The seller is “w7flh” and is located in this country: US. This item can be shipped worldwide.

• Number of Speakers: 1
• Brand: Fender
• Number of Channels: 1
• Model: Deluxe Reverb
• MPN: 8842
• Amplifier Type: Combo
• Suitable For: Electric Guitar
• Power: 20 W
• Product Line: Deluxe
• Amplifier Technology: Vacuum Tube

1960′s Fisher 500-B Stereo Tube Receiver in excellent working condition. Plays loud and clean on both channels with great fidelity. Great matching construction set of vintage 7591 tubes, 3 test very good to NOS range, 1 a bit lower, but biasing up fine. Just serviced by my technician. Cleaned all controls & switches. Aligned FM Tuner and MPX Front End. Reduced dial cord tension, lubed tuning. Adjusted Output Bias Voltage. Fair Faceplate and Cosmetics. Has some wear a shown. See all pictures for further description. Very good shape for age but has minor scratches, marks, imperfections etc. Not for total neophytes. Vintage gear requires some knowledge. Understanding how to hook up and use, and that the amp requires speaker loads when on to be safe and not damage the amp. Please see our other items for more vintage tubes & audio. This item is in the category “Consumer Electronics\Vintage Electronics\Vintage Audio & Video\Vintage Stereo Receivers”. The seller is “circatubes” and is located in this country: US. This item can be shipped to United States.

• Brand: Fisher
• Model: 500-C
• Country/Region of Manufacture: United States

From a large local collection of tube gear. Unknown working condition, hasnt been used in decades. This is exactly the way I received this. Please see the 12 photos provided including the photos of the inside of the chassis. These have been collected almost to extinction and Very rare and hard to come by. Nothing has been checked. All vintage electronics should be thoroughly checked by a qualified person before power and use. This item is in the category “Consumer Electronics\Vintage Electronics\Vintage Audio & Video\Vintage Amplifiers & Tube Amps”. The seller is “bandit35″ and is located in this country: US. This item can be shipped to United States.

• Brand: GATES
• Type: Tube Amplifier
• Model: GR-90

This Listing is for a Vintage 1930-40 Gibbs Tube Audio Amplifier 6x 6L6, 3x 83 2x 6F6 5x 6F5. This item is untested. The power cord needs to be replaced. Comes exactly as pictured. Please refer to all photos for more details and overall item condition. Vintage 1930-40 Gibbs Tube Audio Amplifier 6x 6L6, 3x 83 2x 6F6 5x 6F5. Check out our entire store for more great products and deals! We do however make every possible attempt to accurately describe the inventory we sell and stand behind it. Since 2016, 8TEN Industries has been a leading asset recovery provider supporting national retailers, brands, and manufacturers. Our 60,000 square foot processing and distribution facility located in Cass City, Michigan has allowed us to become industry leader in turning difficult problems for manufacturers into great deals for our customers. This item is in the category “Collectibles\Radio, Phonograph, TV, Phone\Radios\Parts & Tubes”. The seller is “8ten1944″ and is located in this country: US. This item can be shipped to United States.

• Brand: Gibbs

Reproduction Knight Broadcaster kit. NOTE : We sell two versions of this kit, a point-point wired version like the original in this listing, and our NEW, easier assembly, PC board version. See our other listings for that version. In addition to the gallery photos, this listing has extra photos with captions in the body below, scroll down to see them all. Kit comes with dual 115/230 volt primary transformer, for people in countries requiring 230 volts operation. Kit does not include tubes. Kit includes a BONUS audio input board! The Knight Broadcaster was meant to be used with low level microphone inputs. High level signals will distort the output, unless the input is attenuated. To ease this problem, as well as improve connectivity to audio sources, we have designed an accessory input control board. The kit includes a small 2-3/8 x 2-3/8 PC board (same blue color), to allow easy connection of bare wire, RCA, or 3.5mm jack inputs! The board also features an isolation transformer, if you experience hum problems. See photos in listing below. This is a reproduction kit of the Knight Wireless Broadcaster – Amplifier. High level inputs can be from a MP3 player, iPod, iPhone, cassette player, etc.. The kit also functions as a PA (Public Address) style audio amplifier, and has connections you can hook up a loudspeaker too. This is a custom produced kit, and has no economies of scale, and is therefore more costly than the PC board version. The kit is electrical equivalent to the original, with several minor changes. Our design includes a brand new, high quality, Triad isolation transformer. Appropriate changes has been made for mounting the transformer on the back, and for internal wiring. We have replaced the selenium rectifier with a modern diode. The kit comes with a prewound oscillator coil. As shown in the internal wiring photo, modern filter capacitors, smaller rectifier diode and oscillator coil, give easier and increased assembly and working room! To keeps costs as low as possible, the kit does NOT come with tubes. The tubes (two 50C5 and one 12AX7) are common types, and readily available from many sources. We have gone to great effort, time and expense to acquire vintage style components, like those used in the original design. As shown in the parts photos, the kit currently uses vintage parts, including carbon composition resistors (may be vintage or modern manufacture), phenolic wafer tube sockets, vintage terminal strips, and a vintage compression tuner capacitor. As time progresses on, these parts become harder and harder to find, and at some point may be replaced with modern equivalents. Until otherwise noted, the kit will come with the vintage parts just mentioned. The prototype in the photos used a couple carbon film resistors, but kits will come with ALL carbon composition resistors. The kit now uses black oxide screws to assemble the panels, instead of the costly blue screws shown in the photos. Style of output transformer may vary, depending on our stock. NOTE: This kit requires good electrical and mechanical building skills, and is recommended for advanced builders. Some mechanical modifications are required, such as cutting the metal potentiometer shaft to the correct length, enlarging the tube sockets holes, etc.. The kit is constructed with individual fiberglass panels for the top, front, back and sides. These are fiberglass printed circuit boards, with high durability lettering. The bottom panel is an acrylic or similar plastic material, it’s color may vary or be clear. The parts are connected by plastic brackets and screws, as you can see in the internal view photo. The original manual is supplied as a PDF file on a CD-R. An addendum assembly file is supplied as a RTF file on the CD-R. Note we do not supply copies of manuals. The kit is only for sale people with experience building and operated line powered devices. The kit must be operated under FCC Part 15 regulations at all times. This unit must only be operated with the supplied line isolation transformer. Not for sale to, or use by minors. It is assumed that the unit(s) will be installed and operated by qualified personnel. See our other listings for more Radio, Electronic and other RARE and UNIQUE items. NOTE : The flat and reflective surfaces cause some reflections in the photos. Vertical’lines’ on the front panel are reflections from the corrugated cardboard the unit was photographed on. With fiberglass panels and stainless steel hardware, your kit will look good for many years! Kit now features black oxide panel connecting screws, not blue screws shown in photos. Modern filter capacitors, rectifier diode and smaller coil, give increased working room. Kit now uses PC mount RCA jacks, see text. Brand new in box isolation transformer. Kit is available with a dual 115/230 volt primary transformer, for people in countries requiring 230 volts operation. Request this option if necessary, otherwise you will receive a 115 volt primary transformer. CD-R with original manual, and addendum instruction file. Accessory input control board now included with kit. Board provides RCA, 3.5mm jack, and screw terminal input connections, level control, and isolation transformer. Board can easily mount to panels if desired, see above and below photos. See our other listings, for the PC board version of this kit. See our other listings, for our much lower cost, miniature tube transmitter. For people interested in Heathkit projects, see our reproduction CR-1 crystal radio kits (standard and low cost versions), and our EXCLUSIVE PC board kits in the photo below. See our other listings for our EXCLUSIVE PC board kits. Powered by SixBit’s eCommerce Solution. This item is in the category “Collectibles\Radio, Phonograph, TV, Phone\Radios\Tube Radios\1960-Now”. The seller is “ppelectronics” and is located in this country: US. This item can be shipped worldwide.

• Country/Region of Manufacture: United States

For sale is a rare set of Quad II / Quad 22 tube amplifier and preamplifier from England in as-is untested condition. I did not attempt to power this up since I don’t have transformer. Please note these are 220-240V. You will be getting exact units that are in the picture. They are missing tubes as shown, and the preamp is also missing 1 button cover. The amp are fairly close match serial #74508 and #74835. The preamp has the cable to connect to the amp, but is missing the power cord. All unit are in fair physical condition given their age, they do have scuff, some pittings/rust on all of the chassis. Many of these items will have issue that is unknown to me, or should be expected for equipment of vintage nature. All items should be inspect by qualify service man and get check out before long term use. In certain case where I can test the item, I will report the extend of my test and the result. Again please expect that the unit may have more issue than what I stated here, and no return will be accept for that reason. Please study the picture carefully as they are part of the description. If you don’t see something in the picture they are not included. In most case some screws may be missing from the back cover, or bottom plate. This is a used set of Quad II/ 22 in as-is condition. Vintage electronics contain 20-50 years old parts (belts, rubber parts, caps, etc) that while may work at the time I tested the unit, can fail at any given time. It can be a few weeks, months, or years before it fails. Service is recommend since I have not tested these unit fully, and their working condition is unknown. Due to nature of vintage electronic, there is no return accept for this item. Please note that I leave a tampering proof on these unit, that will not effect its function, but will tell me if the unit has been open in anyway. It will be very well packed (double box is available upon requested) and fully insured + signature confirmation. In small chance it get damaged during transit, please take plenty of pictures and contact me before opening up the package. This item is in the category “Consumer Electronics\Vintage Electronics\Vintage Audio & Video\Vintage Speakers”. The seller is “huho4499″ and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, South Africa, Belgium, France, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, New Zealand, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Republic of Croatia, Malaysia, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Pakistan, Paraguay, Reunion.

• Model: 22 II
• Country/Region of Manufacture: United Kingdom
• Brand: Quad

(Tracking numbers are not available in some areas). Please check your address. Thank you for your understanding. This item is in the category “Consumer Electronics\Vintage Electronics\Vintage Audio & Video\Vintage Amplifiers & Tube Amps”. The seller is “waiyorozu-shop” and is located in this country: JP. This item can be shipped worldwide.

• Brand: Luxman
• Type: Tube Amplifier
• MPN: A3300