Vintage Tube Amp

CLASSIC 20 112 COMBO GUITAR AMPLIFIER. Introducing the new Peavey Classic 20 watt 112 combo with an all-tube preamp and power amp, providing the distinctive sonic punch of the larger, iconic amplifiers on which it is based, but in a more compact footprint (7.25″ x 14″ x 7.75/185mm x 356mm x197mm) weighing significantly less (34.7 lbs/15.7 kg). This latest addition brings new life into the legendary product line by now providing players that iconic tone in a package better accommodating to today’s smaller stage and bedroom performances. Boasting two channels that mirror the same voicing and gain structure of its bigger Peavey amplifier siblings, in addition to a specially designed boost function, the Classic 20 112 Combo is a versatile, powerful unit that is equally suitable to virtually all musical styles. Two EL84 power tubes and three 12AX7/ECC83 preamp tubes deliver the rich, warm tube-amplifier tones that are so sought after by players and engineers. Each of the Peavey Classic 20 112 Combo’s channels shares EQ, an effects loop, and reverb (all footswitchable), while the amp’s rear panel features Microphone Simulated Direct Interface (MSDI) with XLR output and USB out, 3-position power attenuator switch allowing for 20 watt, 5 watt or 1 watt operation, and speaker defeat switch. The Classic 20 112 Combo’s front panel includes a ¼ INPUT jack, VOLUME knob, CHANNEL switch for selection of’LEAD’ or’RHYTHM’ channels, PRE-GAIN to control the input level of the lead channel i. Overdrive and gain, POST GAIN to balance the sound between the two channels, BASS, MIDDLE, & TREBLE EQ controls, REVERB to dial in the amount of ambience, a Pilot Light indicating when AC power is being supplied and the Classic 20 112 Combo’s POWER SWITCH is in the “ON” position, STANDBY switch, and OUTPUT TUBE STATUS INDICATION T. LEDS that illuminate red or green, depending on the status of the output tube they are monitoring. 2x EL84 power tubes and 3x 12AX7/ECC83 preamp tubes. Two footswitchable channels with three-band EQ. Footswitchable volume boost on both channels. Footswitchable buffered effects Loop. Tube Status Indication T. Impedance switch for 16 or 8 ohm cabinets. MSDIT Output with XLR and ground lift switch. Attenuator switch for 20 watts, 5 watts or 1 watt output power. Single 16 Ohm Peavey Sheffield 1230+. Weight Packed: 38.58 lb(17.5 kg). Width Packed: 22.2(56.388 cm). Height Packed: 23.8(60.452 cm). Depth Packed: 13.8(35.052 cm).

CLASSIC 20 112 COMBO GUITAR AMPLIFIER. Introducing the new Peavey Classic 20 watt 112 combo with an all-tube preamp and power amp, providing the distinctive sonic punch of the larger, iconic amplifiers on which it is based, but in a more compact footprint (7.25″ x 14″ x 7.75/185mm x 356mm x197mm) weighing significantly less (34.7 lbs/15.7 kg). This latest addition brings new life into the legendary product line by now providing players that iconic tone in a package better accommodating to today’s smaller stage and bedroom performances. Boasting two channels that mirror the same voicing and gain structure of its bigger Peavey amplifier siblings, in addition to a specially designed boost function, the Classic 20 112 Combo is a versatile, powerful unit that is equally suitable to virtually all musical styles. Two EL84 power tubes and three 12AX7/ECC83 preamp tubes deliver the rich, warm tube-amplifier tones that are so sought after by players and engineers. Each of the Peavey Classic 20 112 Combo’s channels shares EQ, an effects loop, and reverb (all footswitchable), while the amp’s rear panel features Microphone Simulated Direct Interface (MSDI) with XLR output and USB out, 3-position power attenuator switch allowing for 20 watt, 5 watt or 1 watt operation, and speaker defeat switch. The Classic 20 112 Combo’s front panel includes a ¼ INPUT jack, VOLUME knob, CHANNEL switch for selection of’LEAD’ or’RHYTHM’ channels, PRE-GAIN to control the input level of the lead channel i. Overdrive and gain, POST GAIN to balance the sound between the two channels, BASS, MIDDLE, & TREBLE EQ controls, REVERB to dial in the amount of ambience, a Pilot Light indicating when AC power is being supplied and the Classic 20 112 Combo’s POWER SWITCH is in the “ON” position, STANDBY switch, and OUTPUT TUBE STATUS INDICATION T. LEDS that illuminate red or green, depending on the status of the output tube they are monitoring. 2x EL84 power tubes and 3x 12AX7/ECC83 preamp tubes. Two footswitchable channels with three-band EQ. Footswitchable volume boost on both channels. Footswitchable buffered effects Loop. Tube Status Indication T. Impedance switch for 16 or 8 ohm cabinets. MSDIT Output with XLR and ground lift switch. Attenuator switch for 20 watts, 5 watts or 1 watt output power. Single 16 Ohm Peavey Sheffield 1230+. Weight Packed: 38.58 lb(17.5 kg). Width Packed: 22.2(56.388 cm). Height Packed: 23.8(60.452 cm). Depth Packed: 13.8(35.052 cm).

This listing includes a Vintage Ampeg AC-12 20-Watt Tube Amplifier 1×12 Speaker Combo. It was tested and is working properly with. A clean and powerful sound. Pots are clean and without any static. It needs a footswitch to turn off reverb. And although this amp was designed for an accordion, it’s good for guitars. Salesbaron is in Los Angeles, 90039. All major credit cards. Filing a claim should be reserved as a last resort to solving an issue. Please give us a chance to solve any issues that you may have for any reason before leaving feedback.

Vintage EICO model HF-20 mono integrated tube power amplifier, WITHOUT cage. It dates from approximately 1958, and is in original as-found condition with wear and cosmetic issues consistent with its age. The 2-prong power cord is fairly stiff and the strain relief grommet where it enters the chassis has crumbled. The AC receptacle on the rear panel labeled “Phono Power” is chipped. There is a small gouge at the center top of the screening on the rear panel where it once indicated “HF-20″ as shown. All electrical components appear to be original. Note that there’s a crease in the top of one of the multi-section electrolytic capacitors as shown in pics. There is some minor corrosion on the end bells of the output transformer, and some flaking of the finish around some of the mounting screws on the top of the chassis. The knobs have various scratches as shown. The tubes used are a mix of RCA, GE, Tung-Sol, Realistic, and Groove Tubes, and are types: 6L6GC/5881, 12AX7-ECC83, 12AU7/A, and 5U4GB. NOTE: This amplifier was briefly tested at line voltage and idled without incident or excessive hum through an 8-ohm speaker. A Sony Discman CD player was connected to the “Phono-2″ RCA input on the rear panel, and it played to a comfortable level. The EQ controls appeared to affect their respective frequency ranges. As this is a 60+ -year-old electronic device, no guarantee is being made as to its operating condition or specifications. It should be presumed that it could be in need of restorative or repair work to perform as intended. This item is in the category “Consumer Electronics\Vintage Electronics\Vintage Audio & Video\Vintage Amplifiers & Tube Amps”. The seller is “rogo” and is located in this country: US. This item can be shipped to United States, New Zealand, Fiji, Papua New Guinea, Wallis and Futuna, Gambia, Malaysia, Taiwan, Poland, Oman, Suriname, United Arab Emirates, Kenya, Argentina, Guinea-Bissau, Armenia, Uzbekistan, Bhutan, Senegal, Togo, Ireland, Qatar, Burundi, Netherlands, Iraq, Slovakia, Slovenia, Equatorial Guinea, Thailand, Aruba, Sweden, Iceland, Macedonia, Belgium, Israel, Kuwait, Liechtenstein, Benin, Algeria, Antigua and Barbuda, Italy, Swaziland, Tanzania, Pakistan, Burkina Faso, Panama, Singapore, Kyrgyzstan, Switzerland, Djibouti, Chile, China, Mali, Botswana, Republic of Croatia, Cambodia, Indonesia, Portugal, Malta, Tajikistan, Vietnam, Cayman Islands, Paraguay, Saint Helena, Cyprus, Seychelles, Rwanda, Bangladesh, Australia, Austria, Sri Lanka, Gabon Republic, Zimbabwe, Bulgaria, Czech Republic, Norway, Côte d’Ivoire (Ivory Coast), Kiribati, Turkmenistan, Grenada, Greece, Haiti, Greenland, Yemen, Afghanistan, Montenegro, Mongolia, Nepal, Bahamas, Bahrain, United Kingdom, Bosnia and Herzegovina, Hungary, Angola, Western Samoa, France, Mozambique, Namibia, Peru, Denmark, Guatemala, Solomon Islands, Vatican City State, Sierra Leone, Nauru, Anguilla, El Salvador, Dominican Republic, Cameroon, Guyana, Azerbaijan Republic, Macau, Georgia, Tonga, San Marino, Eritrea, Saint Kitts-Nevis, Morocco, Saint Vincent and the Grenadines, Mauritania, Belize, Philippines, Democratic Republic of the Congo, Republic of the Congo, Colombia, Spain, Estonia, Bermuda, Montserrat, Zambia, South Korea, Vanuatu, Ecuador, Albania, Ethiopia, Monaco, Niger, Laos, Ghana, Cape Verde Islands, Moldova, Madagascar, Saint Pierre and Miquelon, Lebanon, Liberia, Bolivia, Maldives, Gibraltar, Hong Kong, Central African Republic, Lesotho, Nigeria, Mauritius, Saint Lucia, Jordan, Guinea, Canada, Turks and Caicos Islands, Chad, Andorra, Romania, Costa Rica, India, Mexico, Serbia, Kazakhstan, Saudi Arabia, Japan, Lithuania, Trinidad and Tobago, Malawi, Nicaragua, Finland, Tunisia, Luxembourg, Uganda, Brazil, Turkey, Germany, Egypt, Latvia, Jamaica, South Africa, Brunei Darussalam, Honduras.

• Brand: EICO
• Type: Tube Amplifier
• Model: HF-20
• Country/Region of Manufacture: United States