This is a General Electric “Stereo Classic” Model RG-1000 Remote Control Unit, made in Auburn, NY in the early days of home stereo. It’s a passive accessory with ganged volume and balance potentiometers on a 30-foot cord, so you can adjust both from your chair. GE built it for its Stereo Classic tube amplifiers. Per the instructions, it also works with other amps that have a tape or preamp output, or with a pair of mono amps such as the GE PA-20. The unit has a textured aluminum faceplate with chrome trim, ebony knobs and base, and the GE Hi-Fi branding. The cord has its original L/R marker tags, and the yellow factory twist ties are still in place. Tested: Both potentiometers check out with a multimeter, showing smooth, continuous resistance sweep across volume and balance with no open spots. It has not been tested in a live audio system. Condition: Unit is clean, with bright chrome and good faceplate graphics Cord is supple, with no cracks or splits noted Original box shows edge wear, corner tears, and a detached end flap (included) Instruction sheet is complete, with fold wear and light toning, and a small paper loss on the illustration. Supremely Rare in this condition!
Vintage Capitol Tube Amplifer (3985-01) and Control Panel (3985-04) – Hot Chassis. Please note: there is no power transformer, making this a hot chassis – appropriate care and research are required before attempting to use or service it safely. It is designed to use (4) 25L6 tubes and (3) 12AX7 tubes. The 12AX7 tubes are missing, and the 25L6 tubes are included but have not been tested. We are including the wooden face, and the unit comes exactly as shown. The metal faceplate shows some wear but is in overall good condition. All parts are clean and in good cosmetic condition. Please review all the photos carefully to fully understand the item’s condition. This is a stereo tube amplifier. The amplifier chassis measures: 12-1/2 x 6-3/4 x 5. The control panel measures 12 x 2 x 3-1/4. The wooden faceplate measures 15-5/8 x 7-3/4.
Badkey Drive Effector Vintage Tube Amp Sound Control Pedal – New. Vintage Vacuum Tube Amplifier. Experience authentic vintage sound characteristics. Unique tonal variations controlled by foot-operated knobs. Type: Vacuum Tube Amplifier. Operation: Foot-controlled knob adjustments for sound modulation. Product Type: Amplifier. Control Type: Foot-operated knobs. We are located in Japan. It’s our pleasure to make you happy by proposing our recommend item. If you have any questions or request about items, please feel free to ask us. International Buyers – Please Note. We do not mark merchandise values below value or mark items as – gifts – The US and International government regulations prohibit such behavior. Thank you for your understanding.
Vintage PHILCO 6V6 Mono Tube Amplifier with Control Knobs (G1706). The amplifier has been tested in the console and is confirmed to be in working condition. The tubes were evaluated using a Hickok TV-7/U tester, see below. Cosmetically, the faceplate and knobs show minor wear consistent with age but remain in excellent overall condition. The chassis is clean and well-maintained. A Philco badge is included with the unit. Please refer to the photos for a closer look at its condition. Tube test results: 6V6 – tests at 84 min. 46; 6V6 – tests at 79 min. 46; 12AX7 – tests triode 1 and 2 at 24 / 26 min. The faceplate measures 12-3/8 x 3-5/8. The chassis measures 10-3/4 x 11 x 5.25. The included badge measures 6-3/4 long.
Vintage Acoustic Control Corp Model 164 Guitar Tube Amp Amplifier. Not an expert but it was briefly tested with both a guitar and keyboard. It sounds clear to me through the main input on the front of the amp. There is some static when adjusting the knobs as is common with older amps. No further testing was done. Has cosmetic wear as shown.
Vacuum tubes used: 12AX7: 4, 12AU7: 4. Input sensitivity: Phono MM: 2mV, Phono MC: 0.2mV. The appearance has small scratches, dullness, dirt, etc. Due to normal use. Distortion rate: 0.05% or less.
This vintage Fisher x-101-D control amplifier has been recently recapped and serviced, ensuring its optimal performance. The amplifier boasts a classic tube design and is perfect for audiophiles who appreciate the timeless sound of vintage audio equipment. The Fisher brand is well-known for its high-quality audio products, and this amplifier is no exception. The x-101-D model features a sleek and minimalist design, making it a great addition to any home audio setup. Its various inputs allow for versatility in connecting to different audio sources. This amplifier is a must-have for anyone who wants to enjoy the warm, rich sound of vintage audio equipment. I have always used a power strip to turn it on and off to eliminate wear and tear on the power switch. It is totally optional though. Remember, this unit is quite old, not new so obviously it does show signs of use. Thank you for looking.