Vintage Tube Amp

Marantz 8B sound great with 4 new EL 34 Tube Amp Doctor sound great. Other than a few scratch on top the amp sound great…

This Marantz 8B is in good cosmetic condition for it’s age. Yes, there are scuffs and scratches, but overall it’s been well cared for and includes the original cage (which is usually missing). The better news is that it’s been recapped! There are still a handful of original capacitors that you may want to change, but a majority have been replaced. The power cable has been replaced as well. The EL34 tubes are Soviet tubes which have been branded for National. Overall, this is a nicely restored 8B that’s ready to go! The bottom line is this… You’ll receive your item on time and in perfect condition regardless of how big, heavy, or delicate your item may be! WHAT’S INCLUDED IN THE SALE: You will only receive what is shown in the photographs. If you do not see it in the photos, it is likely not included in the sale. That includes manuals, packaging, power cords, etc. However, please note that it is your responsibility to ensure we receive the item in good condition. ABOUT US: Our company, Ham & HiFi, is located in Sparks, NV. Everyone in the shop is a ham operator and some have been licensed for more than 50 years.

Marantz Model 9 Vintage Tube Monoblock Amplifier (Single) – THE Holy Grail. General: This is a unique opportunity to own one of the most coveted pieces of audio history. The Model 9 was the top of the line for Marantz in the late 1960′s, and while they do come up for sale on occasion, they are fairly rare. We’ve only had the pleasure of having one or two sets here at SkyFi. This listing is for a single unit, perfect for someone looking for a matching sock :- or setting up a mono system that’s so popular these days. While we have a second Marantz Model 9, they were too far apart in production dates to sell as a pair. Most shops would do just that and it’s likely the new owner would never notice much of a difference other than a slight gain variation. But that’s not how we roll. Physical condition is above average. No signs of heavy use or abuse anywhere to be found. All paintwork and writing is intact and original! Incredible when you realize this is nearly 60 years “young” in age. This amplifier also includes a very desirable set of vintage tubes GE/Amperex. The Model 9 clocks in at 63 lbs, offers 70 W, and can push up to 40 W in a user selectable Triode output mode. Please see our photos for a copy of the original Marantz 1960′s advertisement with full specifications. Note this Model 9 is not the re-issue amplifier, but rather an original vintage unit from the 1960′s. This amplifier is missing its front connection cover which is very common. It also had the top cover screws replaced at some point in the past. Light cosmetic blemishes to the chassis and faceplate. This unit appears to be all original per our research and inspection. We fitted it with a period correct set of tubes consisting of a pair of GE branded Mullard gold pin 6922, Amperex branded GE 6CG7, and two matched date code pairs of strong testing Mullard Blackburn XF3 El34. The amp biased up as expected intended and passed our bench and listening tests with flying colors. The serial number of this unit is 2925 placing it towards the end of Model 9 production. Using EL34 tubes, this ultra-linear parallel push-pull design produced 70 watts of power, a significant accomplishment for its time. The increased power resulted, in part, from the strong rivalry with McIntosh, whose power amplifiers (at the time) were generally more muscular than comparable Marantz models. It’s worth noting that the MODEL 9 can also be set in triode operation for even better sound at lower wattage. In addition to its high power, the MODEL 9 reached new cosmetic horizons thanks to a bias meter centered on the front panel and a drop-down front panel door that concealed adjustments and connections. Until then, Marantz products had been more industrial-looking devices designed to be hidden away, but Saul was coming to realise that the audiophile was as equally as concerned about interior design, and that highend audio equipment was something that should be put on display. Mid-century design and architecture is one of the most significant design movements to date. It was during this period that folks began to care more about how their homes looked, and indeed about how their music sounded. Bauhaus had infiltrated New York, while designers like Eames, Bertoia, Saarinen, Wright, and Le Corbusier were creating aspirational products and places. The MODEL 9 was designed to align with, and perhaps accentuate, such sought-after statement pieces, and the certain lifestyle they represented. Built on Heroes of the Past In 1960, Paul Simon, Neil Diamond and Lou Reed were New York’s most exciting young artists. The computer mouse, etch a sketch, countertop microwave oven and the audio cassette had just been invented. Thanks to the efforts of guitar hero Les Paul, multitrack recording had become standard for both consumption and recording. His company, Ampex, had created the eight-track studio recorder, enabling people to record instruments separately and mix them into one cohesive composition, and so music lovers were looking for technologies that could accurately reproduce those recordings. Since 1953, Saul Marantz had been developing a series of amplifiers from his home in Kew Gardens, Queens. Having found success with his audio consolette, Saul evolved the product into the MODEL 1, which, with a great deal of tinkering became the MODEL 2, and so on, until in 1960 he released the MODEL 9, a groundbreaking new amplifier. Yet the MODEL 9 was more than just a looker. It was one of the first amplifiers to use a meter and knob to perform different test functions (at gain zero). It is equipped with trimmers to adjust the bias of every output tube, but also to set AC and DC balance, which was of course incredibly convenient for the user at that time as it meant that no scope or other testing equipment was needed. And such was the amplifier’s smooth control and stability of power, NASA famously customized the MODEL 9 for use in the Apollo Space Program. Again, it is Saul’s understanding of mid-century design that has meant the porthole has stood the test of time. It is iconic today, as it was 60 years ago. Like many products at the time, self assembly was required, partly in the interest of keeping the price down. Each unit came with a manual, test card, and schematic diagram, as well as an accessory kit containing an assortment of screws and an Allen key. The instruction manual goes on to say, The MODEL 9 is remarkably cool in its normal operation. Admittedly it does then warn that any amplifier will become hot if not allowed to freely dissipate itself into the surrounding air.. But still, it is remarkably cool. Ownership: Unknown Connections: RCA inputs and speaker terminals. General Sound: Smooth, uncolored, undistorted natural and clean Cosmetic Condition: 8/10 = Very Good. Excellent front faceplate, one minor flaw on chassis side or top. Working Condition: Working perfectly and tested in our lab and listening room. Included: Just the unit and power cord. Packing: Will be packed using our highly developed in-house process and custom packing materials. Testing Process: We start with a visual inspection of all internal components to make sure that there are no signs of heat stress or damage. Capacitors are checked for telltale signs of predictive failure including bulging, shrunken wrappers, or physical leakage. We also inspect resistors and other passive components for signs of overheating. If tube arcing has occurred in the past we can usually spot discoloration on the output tube sockets. On vintage units we often spot check select capacitors for value and ESR. If the amplifier passes visual inspection, we move on to a full test of all of the tubes. We use a modern Amplitrex AT-1000 Professional Tube Tester which is capable of testing both emission and Gm with a high degree of accuracy. We document the results of each tube and replace any weak or suspect tubes before proceeding. When we power on tube amplifiers for the first time we usually use a variac and current limited AC supply and slowly raise the voltage up to nominal mains level while monitoring plate, screen, filament, and negative bias supply voltages where applicable. If everything is in order we feed a low level test signal into the amplifier’s input and monitor its output on an oscilloscope across an 8 ohm dummy load. At this point we are just looking to verify basic function and confirm that the output transformers are not damaged. Once we have verified that the amplifier is safe to operate, we connected it to full mains power. For cathode biased amps we monitor the plate to cathode voltage to determine if the output tubes are operating in a safe range. Once the output section is verified we move onto bench evaluation. We start by feeding the input of the amplifier with a low level 1 KHz test signal, slowly increasing its amplitude while monitoring the amplifier’s output on an oscilloscope for signs of noise, clipping, distortion, or improper channel balance. We continue increasing the signal level until the amplifier reaches clipping. At this point we take an output power measurement and compare it to the spec sheet of the amplifier to verify proper performance. We finish off the bench evaluation with a 1 KHz square wave check and a 20 Hz to 20 KHz sine sweep to assess the amplifier’s frequency response characteristics. This battery of tests will usually reveal if the amplifier has any issues that need further attention. Before the device leaves the bench we perform a listening test with actual music using a variety of preferred test tracks. Our benches are outfitted with familiar monitor speakers which help us identify inconsistencies that will not always show up on our test gear. The main things that we are listening for are hum or noise with no signal present, proper center image, clicks, pops, or any other obvious undesirable audio characteristics. If the unit passes all of these tests it is moved to our long term testing rig where we simulate real word operating conditions for 6-8 hours minimum. For tube amps we like to run this test at least twice. This allows us to monitor the unit for signs of thermal runaway or intermittent issues that only crop up when it has fully come up to temperature. We find this step to be essential, especially for vintage units. SkyFi Audio – Curators of Vintage Audio Gear. No mid-fi, no gimmicks, no junk. Each piece of equipment is cosmetically restored and fully tested in our well-equipped lab by an engineer with 30+ years of experience in the HiFi world. Please note we are not a repair shop and only restore what we own. If we don’t have the original packaging, we use heavy-duty double-ply corrugated boxes with custom made to your item SealedAir Instapak expanding foam custom inserts. In many cases this has proven to be better than the original packaging! We also use high quality fiber reinforced tape to seal our packages. We have too many items for sale and it’s nearly impossible to keep track of offers outside of the official system. Our items are available for pick-up. No additional information at this time. You might also like. Dynavector 10×3 High-Output MC Phono Cartridge. Music Reference RM-5 MK II Tube Preamplifier with Phono. Music Reference RM-9 Tube Amplifier With EL34′s.

Marantz Model 9 Vintage Tube Monoblock Amplifier (Single) – THE Holy Grail – Early Serial. General: This is a unique opportunity to own one of the most coveted pieces of audio history. The Model 9 was the top of the line for Marantz in the late 1960′s, and while they do come up for sale on occasion, they are fairly rare. We’ve only had the pleasure of having one or two sets here at SkyFi. This listing is for a single unit, perfect for someone looking for a matching sock :- or setting up a mono system that’s so popular these days. To match this unit with a later production one you would need to slightly adjust your balance. While we have a second Marantz Model 9, they were too far apart in production dates to sell as a pair. Most shops would do just that and it’s likely the new owner would never notice much of a difference other than a slight gain variation. But that’s not how we roll. Physical condition is above average. No signs of heavy use or abuse anywhere to be found. All paintwork and writing is intact and original! Incredible when you realize this is nearly 60 years “young” in age. This amplifier also includes a very desirable set of replacement tubes consisting of current production Russian 6922, an Amperex branded GE 6CG7, and a set of strong testing matched Mullard XF4 EL34s with various brand markings. The Model 9 clocks in at 63 lbs, offers 70 W, and can push up to 40 W in a user selectable Triode output mode. Please see our photos for a copy of the original Marantz 1960′s advertisement with full specifications. Note this Model 9 is not the re-issue amplifier, but rather an original vintage unit from the 1960′s. Description Using EL34 tubes, this ultra-linear parallel push-pull design produced 70 watts of power, a significant accomplishment for its time. The increased power resulted, in part, from the strong rivalry with McIntosh, whose power amplifiers (at the time) were generally more muscular than comparable Marantz models. It’s worth noting that the MODEL 9 can also be set in triode operation for even better sound at lower wattage. In addition to its high power, the MODEL 9 reached new cosmetic horizons thanks to a bias meter centered on the front panel and a drop-down front panel door that concealed adjustments and connections. Until then, Marantz products had been more industrial-looking devices designed to be hidden away, but Saul was coming to realise that the audiophile was as equally as concerned about interior design, and that highend audio equipment was something that should be put on display. Mid-century design and architecture is one of the most significant design movements to date. It was during this period that folks began to care more about how their homes looked, and indeed about how their music sounded. Bauhaus had infiltrated New York, while designers like Eames, Bertoia, Saarinen, Wright, and Le Corbusier were creating aspirational products and places. The MODEL 9 was designed to align with, and perhaps accentuate, such sought-after statement pieces, and the certain lifestyle they represented. Built on Heroes of the Past In 1960, Paul Simon, Neil Diamond and Lou Reed were New York’s most exciting young artists. The computer mouse, etch a sketch, countertop microwave oven and the audio cassette had just been invented. Thanks to the efforts of guitar hero Les Paul, multitrack recording had become standard for both consumption and recording. His company, Ampex, had created the eight-track studio recorder, enabling people to record instruments separately and mix them into one cohesive composition, and so music lovers were looking for technologies that could accurately reproduce those recordings. Since 1953, Saul Marantz had been developing a series of amplifiers from his home in Kew Gardens, Queens. Having found success with his audio consolette, Saul evolved the product into the MODEL 1, which, with a great deal of tinkering became the MODEL 2, and so on, until in 1960 he released the MODEL 9, a groundbreaking new amplifier. Yet the MODEL 9 was more than just a looker. It was one of the first amplifiers to use a meter and knob to perform different test functions (at gain zero). It is equipped with trimmers to adjust the bias of every output tube, but also to set AC and DC balance, which was of course incredibly convenient for the user at that time as it meant that no scope or other testing equipment was needed. And such was the amplifier’s smooth control and stability of power, NASA famously customized the MODEL 9 for use in the Apollo Space Program. Again, it is Saul’s understanding of mid-century design that has meant the porthole has stood the test of time. It is iconic today, as it was 60 years ago. Like many products at the time, self assembly was required, partly in the interest of keeping the price down. Each unit came with a manual, test card, and schematic diagram, as well as an accessory kit containing an assortment of screws and an Allen key. The instruction manual goes on to say, The MODEL 9 is remarkably cool in its normal operation. Admittedly it does then warn that any amplifier will become hot if not allowed to freely dissipate itself into the surrounding air… But still, it is remarkably cool. SkyFi Cosmetic Notes: This unit has a handful of cosmetic blemishes including marks on the faceplate and chassis. It is also missing its top cover and front control cover. SkyFi Technical Notes: This unit came to us in all original condition but a had a couple of issues. In the spirit of keeping this unit as original as possible we opted to only replace the components that had failed. We replaced a blown screen grid resistor, the bias diode, and one of the large chassis mounted electrolytic capacitors (under chassis). We fitted the unit with a set of replacement tubes consisting of current production Russian 6922, an Amperex branded GE 6CG7, and a set of strong testing matched Mullard XF4 EL34s with various brand markings. Ownership: Unknown General Sound: Neutral sound with little to no coloration Cosmetic Condition: 6/10 = Fair. Three to four minor scratches, or one major scratch. Working Condition: Working perfectly and tested in our lab and listening room. Included: Just the unit and power cord. Packing: Will be packed using our highly developed in-house process and custom packing materials. We start with a visual inspection of all internal components to make sure that there are no signs of heat stress or damage. Capacitors are checked for telltale signs of predictive failure including bulging, shrunken wrappers, or physical leakage. We also inspect the PCBs for discoloration from resistors or transistors that may have been running hot. On vintage units we often spot check select capacitors for value and ESR. If the amplifier passes visual inspection, we move on to a controlled power on sequence using a Sencore safety analyzer to monitor current draw in real time. Once the amplifier is determined to be safe to operate, we connect it to full AC mains for function and power testing. We connect the speaker outputs of the amplifier to a Sencore PA81 Power Analyzer which acts as a dummy load, DC offset monitor, and oscilloscope interface. We start with a low level 1 KHz test signal at the amplifier’s input and slowly increase its amplitude while monitoring the output on an oscilloscope for signs of noise, clipping, distortion, or improper channel balance. We continue increasing the signal level until the amplifier reaches clipping. At this point we take an output power measurement and compare it to the spec sheet of the amplifier to verify proper performance. If the device under test has both balanced and single ended inputs they are both tested at this time. We finish off the bench evaluation with a 1 KHz square wave check and a 20 Hz to 20 KHz sine sweep to assess the amplifier’s frequency response characteristics. This battery of tests will usually reveal if the amplifier has any issues that need further attention. Before the device leaves the bench, we perform a listening test with actual music using a variety of preferred test tracks. Our benches are outfitted with familiar monitor speakers which help us identify inconsistencies that will not always show up on our test gear. The main things that we are listening for are hum or noise with no signal present, proper center image, clicks, pops, or any other obvious undesirable audio characteristics. If the unit passes all of these tests it is moved to our long term testing rig where we simulate real word operating conditions for 6-8 hours minimum. This allows us to monitor the unit for signs of thermal runaway or intermittent issues that only crop up when the unit has fully come up to temperature. We also inspect resistors and other passive components for signs of overheating. If tube arcing has occurred in the past we can usually spot discoloration on the output tube sockets. If the amplifier passes visual inspection, we move on to a full test of all of the tubes. We use a modern Amplitrex AT-1000 Professional Tube Tester which is capable of testing both emission and Gm with a high degree of accuracy. We document the results of each tube and replace any weak or suspect tubes before proceeding. When we power on tube amplifiers for the first time we usually use a variac and current limited AC supply and slowly raise the voltage up to nominal mains level while monitoring plate, screen, filament, and negative bias supply voltages where applicable. If everything is in order we feed a low level test signal into the amplifier’s input and monitor its output on an oscilloscope across an 8 ohm dummy load. At this point we are just looking to verify basic function and confirm that the output transformers are not damaged. Once we have verified that the amplifier is safe to operate, we connected it to full mains power. For cathode biased amps we monitor the plate to cathode voltage to determine if the output tubes are operating in a safe range. Once the output section is verified we move onto bench evaluation. We start by feeding the input of the amplifier with a low level 1 KHz test signal, slowly increasing its amplitude while monitoring the amplifier’s output on an oscilloscope for signs of noise, clipping, distortion, or improper channel balance. Before the device leaves the bench we perform a listening test with actual music using a variety of preferred test tracks. For tube amps we like to run this test at least twice. This allows us to monitor the unit for signs of thermal runaway or intermittent issues that only crop up when it has fully come up to temperature. We find this step to be essential, especially for vintage units. SkyFi Audio – Curators of Vintage Audio Gear. No mid-fi, no gimmicks, no junk. Each piece of equipment is cosmetically restored and fully tested in our well-equipped lab by an engineer with 30+ years of experience in the HiFi world. Please note we are not a repair shop and only restore what we own. If we don’t have the original packaging, we use heavy-duty double-ply corrugated boxes with custom made to your item SealedAir Instapak expanding foam custom inserts. In many cases this has proven to be better than the original packaging! We also use high quality fiber reinforced tape to seal our packages. We have too many items for sale and it’s nearly impossible to keep track of offers outside of the official system. Our items are available for pick-up. No additional information at this time. You might also like. Dynavector 10×3 High-Output MC Phono Cartridge. Music Reference RM-5 MK II Tube Preamplifier with Phono. Music Reference RM-9 Tube Amplifier With EL34′s.

Vvintage Marantz 1060B console stereo amplifier is a true gem for any audiophile seeking high-quality sound. With its powerful Hifi audio capabilities, this integrated amplifier is perfect for those looking to upgrade their vintage audio collection. The unit is in working condition and is able to power any featured refinements such as vintage stereo amplifiers and tube amps. This Marantz 1060 model is a classic in the world of vintage electronics and is sure to impress any listener. Its brand, Marantz, is well-known for producing high-end audio equipment that is built to last. This amplifier is the perfect addition to any collection and will give you the quality sound you have been searching for. Items come as Pictured, As Is.

It was rated at 40 watts RMS (20 watts in triode), with two (2) EL34 output tubes. This listing includes one. Vintage Marantz Model 2 Tube Mono Amplifier as shown. The chassis shows signs of corrosion on the top plate with some of the original silk-screening being affected; but most of the print is still present. The tube cover is included; but is missing the grommets to hold it in place. Therefore the cover is loose and not properly affixed to the amp. This particular amplifier is in tested working order; but comes with no guarantees. It should be completely checked out by an experienced (tube) technician before being placed into normal use. All of the tubes shown in photos are included; but none are branded or screened. One 6AU4-GTA has some loose particles inside; and one EL34 is slightly crooked. Please review all attached photos; and be sure to ask any questions. The amplifier will be Very Securely Double Box Packed with High Quality Packing Materials for Safe Transit and No Worries for a Safe Arrival. Power output: 40 watts into 8? (mono). Frequency response: 20Hz to 20kHz. Total harmonic distortion: 0.1%. Input sensitivity: 0.7V. Signal to noise ratio: 90dB. Speaker load impedance: 4? To 16? Valve complement: 1 x 12AX7, 1 x 6CG7, 2 x EL34, 2 x 6AU4GTA. Dimensions: 15 x 9.5 x 6.5 inches. If you are in one of these locations – please message for rates.

Unit has been fully cleaned and tested for over 8 hours and all aspects function properly. All 4 output have been replace w/quad matched set of KT77.

This is the ORIGINAL Marantz amplifier (model 1 was a preamp), produced from 1956-62. 40 W ultralinear, 20 watt triode. For specs and history. I bought them from a friend and daughter of the original owner about 15 years ago. They had been sitting in her basement since her father’s death some years prior. They had been in the house her entire upbringing. When I bought them, I was told by many people that if I wanted to “flip” them, that I should sell them as-is; but if I wanted to use them that it was imperative to have the components thoroughly tested and refurbished as needed. I very much wanted to used them, and so I had both amps were refurbished by Mike Samra in 2008. I have enjoyed them ever since. I just had them inspected by Benny Amina at Amina Audio in May 2023. I can provide additional photos for serious buyers.