Dynaco Stereo 80 ST-80 Amplifier TESTED 100% SONICS OUTSTANDING CONDITION L@@K

Thursday, August 22nd, 2024
Dynaco Stereo 80 ST-80 Amplifier TESTED 100% SONICS OUTSTANDING CONDITION L@@K

Dynaco Stereo 80 ST-80 Amplifier TESTED 100% SONICS OUTSTANDING CONDITION L@@K

Dynaco Stereo 80 ST-80 Amplifier TESTED 100% SONICS OUTSTANDING CONDITION L@@K

Dynaco Stereo 80 ST-80 Amplifier TESTED 100% SONICS OUTSTANDING CONDITION L@@K

Dynaco Stereo 80 ST-80 Amplifier. Has All 4 Original Feet. Cord Has No Cracks. No Signs Of Corrosion. Lamp On Power Switch Works. Outstanding Condition And Sonics. Please Examine Photos Closely For Cosmetic Condition. Other items From My Collection May Be Viewed In My Listings. A rare piece greatly appreciated by audiophiles and not often seen. A Fantastic Addition To Any Vintage Collection. Power output: 40 watts per channel into 8? (stereo). Frequency response: 10Hz to 50kHz. Total harmonic distortion: 0.5%. Input sensitivity: 1.3V. Signal to noise ratio: 90dB. Speaker load impedance: 4? To 16? Semiconductors: 12 x transistors, 10 x diodes. Dimensions: 14 x 8 x 4 inches. The Dynaco Stereo 80 is an all silicon transistor basic power amplifier for use with separate preamplifiers such as the Dynaco PAT-4 or PAT-5 or for use with tape recorders or tuners such as the Dynaco FM-5 which have their own volume controls. The unit contains two 40 watt amplifiers on one chassis with a common power supply. It has been designed to be used under normal conditions without special safety precautions, just as if it were a high grade tube amplifier. There are no circuit breakers, speaker fuses, or other resettable devices to impede the use of the Stereo 80 under any reasonable conditions of use or abuse. This is achieved by using novel circuits (on which patents are pending) which automatically and instantly protect the amplifier. The components are of the highest quality to protect against failure, both now and for many years in the future. All parts are used conservatively with close tolerances to assure proper operation, and etched circuit modules are pretested under actual use conditions to ensure that every unit, after assembly, will meet the specifications normally associated with laboratory prototypes. The specifications of the Stereo 80 speak for themselves. The distortion at low levels is comparable to that of the finest tube designs, while the high power distortion remains inaudible. See my other auctions for a matching Dynaco PAT-4 Stereo Preamplifier to mate with this. Please check my other auctions for more vintage electronics.

Outstanding Vintage 62′ Hammond Power Amplifier H-AO-29-13 With Its Tested Tubes

Tuesday, August 8th, 2023
Outstanding Vintage 62' Hammond Power Amplifier H-AO-29-13 With Its Tested Tubes

Outstanding Vintage 62' Hammond Power Amplifier H-AO-29-13 With Its Tested Tubes

Outstanding Vintage 62' Hammond Power Amplifier H-AO-29-13 With Its Tested Tubes

Outstanding Vintage 62' Hammond Power Amplifier H-AO-29-13 With Its Tested Tubes

Outstanding Vintage 62' Hammond Power Amplifier H-AO-29-13 With Its Tested Tubes

Outstanding Vintage 62' Hammond Power Amplifier H-AO-29-13 With Its Tested Tubes

Outstanding Vintage 62' Hammond Power Amplifier H-AO-29-13 With Its Tested Tubes

Outstanding Vintage 62' Hammond Power Amplifier H-AO-29-13 With Its Tested Tubes

Outstanding Vintage 62' Hammond Power Amplifier H-AO-29-13 With Its Tested Tubes

Outstanding Vintage 62' Hammond Power Amplifier H-AO-29-13 With Its Tested Tubes

Outstanding Vintage 62' Hammond Power Amplifier H-AO-29-13 With Its Tested Tubes

Outstanding Vintage 62' Hammond Power Amplifier H-AO-29-13 With Its Tested Tubes

Outstanding Vintage 62′ Hammond Power Amplifier H-AO-29-13 With Its individually Tested Tubes. From a fully functional and well maintained model M-111, fully tested before carefully removing. The following are the test values for each tube. 5U4 : 94/94 (94%/94% of NOS). 6BA6 : 95 (95% of NOS). 6V6 : 97 (94% of NOS). 6V6 : 94 (94% of NOS). 12AX7 100/100 (100%/100% of NOS). 12AU7A 95/95 (95%/95% OF NOS). 6AUA 95 (95% of NOS). 6AUA 100 (100% of NOS). 6C4 100 (100% of NOS). 12AU7A 94/95 (94%/95% of NOS). The power cord has a lot of cracking and fraying. It will need replaced. The black tape was placed just for testing. Feel free to message any questions.

Vintage Fender Bronco/Vibrochamp Tube Amp Outstanding Clean Original Serviced

Sunday, November 8th, 2020
Vintage Fender Bronco/Vibrochamp Tube Amp Outstanding Clean Original Serviced

Vintage Fender Bronco/Vibrochamp Tube Amp Outstanding Clean Original Serviced

Vintage Fender Bronco/Vibrochamp Tube Amp Outstanding Clean Original Serviced

Vintage Fender Bronco/Vibrochamp Tube Amp Outstanding Clean Original Serviced

Vintage Fender Bronco/Vibrochamp Tube Amp Outstanding Clean Original Serviced

Vintage Fender Bronco/Vibrochamp Tube Amp Outstanding Clean Original Serviced

Vintage Fender Bronco/Vibrochamp Tube Amp Outstanding Clean Original Serviced

Vintage Fender Bronco/Vibrochamp Tube Amp Outstanding Clean Original Serviced

Vintage Fender Bronco/Vibrochamp Tube Amp Outstanding Clean Original Serviced

Vintage Fender Bronco/Vibrochamp Tube Amp Outstanding Clean Original Serviced

Vintage Fender Bronco/Vibrochamp Tube Amp Outstanding Clean Original Serviced

Vintage Fender Bronco/Vibrochamp Tube Amp Outstanding Clean Original Serviced

Vintage Fender Bronco Vibrochamp Tube Amp Outstanding Clean Original Serviced Condition. This amp has been tested, all contact points and pots have been professionally cleaned, and it is working great. Amp appears all original including capacitors, resistors, speakereverything except for a new 3 prong grounded power cord and the rear panel screws (top panel is missing). The tubes are all vintage RCA and period correct. Transformer and speaker codes indicate this is a 1968 model. Cabinet is solid pine. The vibrato is warm and silky and the amp has both Fender clean tones and a nice distortion when cranked. Please see pictures for a full description and feel free to ask questions. This amp is ready to play. The item “Vintage Fender Bronco/Vibrochamp Tube Amp Outstanding Clean Original Serviced” is in sale since Monday, November 2, 2020. This item is in the category “Musical Instruments & Gear\Guitars & Basses\Guitar Amplifiers”. The seller is “craftsman444″ and is located in Columbia, Missouri. This item can be shipped to United States.
  • Brand: Fender
  • Impedance: 4 Ohms
  • Model: Bronco Vibro Champ
  • California Prop 65 Warning: No
  • Power: 5 W
  • Bundle Description: N/A
  • Amplifier Technology: Vacuum Tube
  • Product Line: Fender Vibro Champ
  • Suitable For: Electric Guitar
  • Custom Bundle: No
  • Number of Channels: 1
  • Amplifier Type: Combo
  • Number of Speakers: 1
  • MPN: N/A