Vintage Tube Amp

Dynaco ST-70 Tube Amplifier – Working – good condition. Please see the detailed photos for more on condition. Guaranteed to be as described. A picture is worth a thousand words, and I always picture the actual item(s) for sale, so please look carefully at the accompanying photo(s). What you see in the photos is what you get.

Unit has been fully cleaned and tested for over 8 hours and all aspects function properly. All 4 output have been replace w/quad matched set of KT77.

Volts 120 Watts 28 Model K503A.

Only one on E-bay at time of listing!

Vintage Sherwood S5000 II Tube Amplifier in Very Good working condition. This amplifier works as expected. Copy and paste the link below to YouTube for demo. Sale as the demo condition, no return.

Looks like NOS but hard to say. One of the PCB boards has a slight bend which is just cosmetic. Very sweet sounding little amp that holds its own against much bigger amps! Sweeter sounding then bigger brother ST-70. I have two so one must go.

Vintage Heathkit Stereo amplifier SA-2 in Excellent Condition for its age, it turns on, the light comes on, all the buttons are functional.

Dynakit Stereo 70 still looks very beautiful inside and out. No dents or damage. Message for any other questions. Open to offers close to the asking price. They are very reasonable and fair.

Vintage Tube Amplifier Electronic As Is For Parts Or Repair Condition. This vintage tube amplifier comes in as is condition for parts/repair only. Please refer to pictures for current condition. If you have any questions or need any other pictures please feel free to contact me. Thank you for supporting my small business.

For sale a LUXMAN model SQ5Bb tube amplifier (circa 1965) in really excellent condition. Amplifier was carefully tested and in good working order, no issues. There are inputs for PHONO, TUNER, TAPE. The output tubes – 6BQ5 (EL84). Amplifier operates on 120V. Specifications: Output and a distortion – 14W+14W (50Hz), less than 1% Frequency characteristic Less than [20Hz-20000Hz 1dB] Input sensitivity/impedance: (10W, 1kHz) Tape: 2mV/100kohm MAG: 3.5mV/100kohm Tuner, X’TAL:270mV/2Mohm Output-terminals – 4ohm, 8ohm, 16ohm, 32ohm S/N ratio (volume maxima) Tape:52dB MAG:60dB Tuner, X’TAL:65dB Tone control With the LUX scheme NF type it1 stopper: 16dB Equalizer Tape:NAB MAG:RIAA Attachment Tapes monitor DIN recording-play connector The semiconductor used Tubes: 3 – 12AX7, 2 – 6AN8, 4 – 6BQ5(EL84) Power consumption 110W Dimensions Width 390x height 155x depth of 290mm Weight 11.2kg Check my other ads for more quality vintage electronics.