Vintage Tube Amp

After the great reaction to the Little Mark Vintage Head, Markbass designed the Mark Vintage Pre. The Mark Vintage Pre delivers a massively wide palette of tone options, from modern sounds to vintage ones to fit pretty much any genre you’re going for. But this pedal is more than just a preamp. You get a tube preamp, a 4-band EQ, two switchable EQ filters, two different types of drive with level and blend controls, a headphone practice amp with an AUX-in and headphone out, and a switchable effects loop which can also be used as a tuner output. Markbass Mark Vintage Pre Tube Bass Preamp Pedal Metal. 4-band EQ/3-way Switch Like the Little Mark Vintage head, the Makr Vintage Pre’s 4-band EQ section has a new setting on frequencies center, all tuned to offer a pretty balanced tone that easily cuts in the mix, plus a 3-way switch with three useful EQ preset options to get very quickly a real FLAT setting, a CUT setting with scooped Mids, and enhanced Low and High, and an OLD option with scooped High to get an old, vintage-style tone. Two Types of Distortion/Blend Control The Mark Vintage Pre offers two types of distortion (selectable via foot switch). The amount of drive tone, ranging from crunchy overdrive to aggressive distortion, is controlled by the Drive pot. The Blend control allows you to mix the Drive tone with the Clean signal of the tube preamp. Adding a bit of distortion during a studio recording gives a “gorgeous” bass sound cutting in the mix. Boost The Boost switch allows you to boost your signal level to +6dB and instantly get more headroom whenever you need it. Box The Balanced D. Out is a real D. Aux IN/Headphone OUT/FX LOOP The Mark Vintage Pre includes a headphones output and an aux input for connecting an iPod or MP3 player in order to mix it with your bass sound. This allows discrete playing and practicing anywhere, anytime. Plus, a send/return FX loop to interface your favorite stomp boxes and multi-effect units is also included. True Bypass This pedal features “true bypass” circuit: that means when the Mark Vintage Pre is “off, ” there will be no audio signal quality loss. 4-band EQ / 3-WAY Switch Two Types of Distortion / Blend Control Boost Real DI box Digital Outs Aux IN / Headphone OUT / FX LOOP True Bypass. Tube: 12AX7 (ECC 83) Input: Impedance 1M? , max. Voltage 6 Vpp Outputs: Balanced DI Out with transformer (GND switch) Digital Outputs: RCA (with transformer) and TOSLINK with sampling rate switch 44.1/48/96KHz Gain Range: -46 ÷ +23 dB EQ Low: Level ±16 dB Freq. 70Hz Mid Low: Level ±16 dB Freq. 400 Hz Mid High : Level ±16 dB Freq. 2.5 KHz High: Level ±16 dB Freq. For example, if your order is placed AND paid for at 1 p. Store Policies If you’re not satisfied, neither are we. It’s that simple. Be in brand-new condition, showing no signs of wear or use such as belt-buckle or pick scratches, scuffs, dings, or scrapes on the instrument or collateral materials.

The product is a pair of vintage Jensen Hypex VH-91A-ST-942 metal loud speaker horns, designed for use with a low to mid power hi-fi tube or solid state amp. These speaker horns are known for their high-efficiency & high-quality sound and iconic design, making them a sought-after item for vintage audio enthusiasts. Great coupled with a 12 vintage woofer and a 1500 hz crossover and a L-Pad to attenuate the higher efficiency horn. The Jensen brand is well-known for producing top-notch audio equipment, and these speaker horns are sure to deliver excellent sound performance for those who appreciate classic audio technology.

This vintage homemade amplifier is a very unique piece. Hand-built by my neighbor, as a student in 1967 for his high school project. Red power indicator lights up and vacuum tubes glow but not tested with other components connected. Was told it has a 30 watt output. Measures 18.5″ x 11″ x 10. Real wood covered with wood grain contact paper. Made from wooden and metal components, as well as some plastic and glass. Comes with a 10 line output connection capability, 3 input jacks, a spare electrical outlet and it has a fuse. The 4 Dials and toggle switch operate smoothly. Custom metal switch position indicator panels behind switches are intricately stenciled/cut and drawn on by hand. Power cord is supple and has no kinks or cracks. It’s perfect for vintage electronics and audio enthusiasts and collectors, or for display as a conversation piece. Has the wonderful retro look and feel. The interesting black tinted plexiglass panel has some slight scratches and stains. Casing has some paint stains and nicks, see pics. Comes from a smoker free environment. Local pick-up recommended, although will pack with extra care with styrofoam peanut packing and bubble wrap inside unit.

Vintage 1950′s All Wood Hedden Tube Amplifier Metal Detector untested. I didn’t know what batteries to use. Has letters and instructions. I do accept Pay Pal. I do not sell reproductions. We try to provide an accurate photo and description of the items we sell. We do not sell new items, and they may show some signs of use or need cleaning. We try to describe the item the best that we can.

After the great reaction to the Little Mark Vintage Head, Markbass designed the Mark Vintage Pre. The Mark Vintage Pre delivers a massively wide palette of tone options, from modern sounds to vintage ones to fit pretty much any genre you’re going for. But this pedal is more than just a preamp. You get a tube preamp, a 4 band EQ, two switchable EQ filters, two different types of drive with level and blend controls, a headphone practice amp with an aux-in and headphone out and a switchable effects loop which can also be used as a tuner output. Markbass Mark Vintage Pre Tube Bass Preamp Pedal Metal LN. 4-band EQ / 3-WAY Switch Like the Little Mark Vintage head, MARK VINTAGE PRE 4 Bands EQ section has a new setting on frequencies center, all tuned to offer a pretty balanced tone that easily cuts in the mix, plus a 3-WAY switch with three useful EQ preset options to get very quickly a real FLAT setting, a CUT one with scooped Mids and enhanced Low and High and an OLD one with scooped High to get an old vintage style tone. Two Types of Distortion / Blend Control The Mark Vintage Pre offers two types of distortion (selectable via foot switch). The amount of drive tone, ranging from crunchy overdrive to aggressive distortion, is controlled by the Drive pot. The Blend control allows to mix the Drive tone with the Clean signal of the tube preamp. Adding a bit of distortion during a studio recording gives a’gorgeous’ bass sound cutting in the mix. Boost The Boost switch allows you to boost your signal level to +6 dB and instantly get more headroom whenever you need it. Real DI box The Balanced DI Out is a real DI box with transformer. Aux IN / Headphone OUT / FX LOOP The Mark Vintage Pre includes a headphones output and an aux input for connecting an iPod or MP3 player in order to mix it with your bass sound. This allows discrete playing and practicing anywhere, anytime. Plus, a send/return FX loop to interface your favorite stomp boxes and multi-effect units is also included. True Bypass This pedal features “true bypass” circuit: that means when the Mark Vintage Pre is’off’, there will be no audio signal quality loss. If you’re looking for a virtually new instrument in possibly less-than-perfect packaging, this is a great value. For example, if your order is placed AND paid for at 1 p. Store Policies If you’re not satisfied, neither are we. It’s that simple. Be in brand-new condition, showing no signs of wear or use such as belt-buckle or pick scratches, scuffs, dings, or scrapes on the instrument or collateral materials.

After the great reaction to the Little Mark Vintage Head, Markbass designed the Mark Vintage Pre. The Mark Vintage Pre delivers a massively wide palette of tone options, from modern sounds to vintage ones to fit pretty much any genre you’re going for. But this pedal is more than just a preamp. You get a tube preamp, a 4 band EQ, two switchable EQ filters, two different types of drive with level and blend controls, a headphone practice amp with an aux-in and headphone out and a switchable effects loop which can also be used as a tuner output. Markbass Mark Vintage Pre Tube Bass Preamp Pedal Metal. 4-band EQ / 3-WAY Switch Like the Little Mark Vintage head, MARK VINTAGE PRE 4 Bands EQ section has a new setting on frequencies center, all tuned to offer a pretty balanced tone that easily cuts in the mix, plus a 3-WAY switch with three useful EQ preset options to get very quickly a real FLAT setting, a CUT one with scooped Mids and enhanced Low and High and an OLD one with scooped High to get an old vintage style tone. Two Types of Distortion / Blend Control The Mark Vintage Pre offers two types of distortion (selectable via foot switch). The amount of drive tone, ranging from crunchy overdrive to aggressive distortion, is controlled by the Drive pot. The Blend control allows to mix the Drive tone with the Clean signal of the tube preamp. Adding a bit of distortion during a studio recording gives a’gorgeous’ bass sound cutting in the mix. Boost The Boost switch allows you to boost your signal level to +6 dB and instantly get more headroom whenever you need it. Real DI box The Balanced DI Out is a real DI box with transformer. Aux IN / Headphone OUT / FX LOOP The Mark Vintage Pre includes a headphones output and an aux input for connecting an iPod or MP3 player in order to mix it with your bass sound. This allows discrete playing and practicing anywhere, anytime. Plus, a send/return FX loop to interface your favorite stomp boxes and multi-effect units is also included. True Bypass This pedal features “true bypass” circuit: that means when the Mark Vintage Pre is’off’, there will be no audio signal quality loss. 4-band EQ / 3-WAY Switch Two Types of Distortion / Blend Control Boost Real DI box Digital Outs Aux IN / Headphone OUT / FX LOOP True Bypass. For example, if your order is placed and paid for at 1 p. Details on how to file this return may be found at your applicable Department of Revenue website. Our products are backed by our 45-Day Satisfaction Guarantee. New Gear: If you’re not satisfied, neither are we. It’s that simple.

Cinemeccanica tube amplifier vintage amp tube. Monoblock integrated Cinema hifi 50′s metal case. Gz34 / 5ar4 el34 el34 6sn7 6sn7. Brand on lebel tags: Carlo Fermini Milano. Huge dimensions: Base 55 centimeters ; Height 76 centimeters ; depth 20 centimeters. Originally installed into cinema Sound reproduction room Hinged wall. You can install this power amplifier hinged wall too! Cinemeccanica is the best Italian brand for Cinema sound system amplification Vintage gears. Oldest production of best amplifiers and Loudspeaker for Cinema Theater Hall. ULTRA RARE TO FIND!! MOST PROBABLY UNIQUE PIECE. Knobs : volume Pilot, Cell – Disk ; Tone A ; Tone B, on-off. ONE AMPLIFIER = 1 PIECE = 1PC = 1 AMPLIFIER MONO NO PAIR.

Vf 6.3 Volts / If 0.65 Ampere / Indirect / Parallel, (AC/DC). New in Box (NOS). We have hundreds of thousands of tubes for manufacturing purposes, all vintage american made. 2 If you are looking to re-tube and amplifier, guitar amplifier, preamplifier, compressor, equalizer, microphones or any tube equipment, send us the model number and we will take care of the rest, and generate a custom listing for you. 4 We carry most USA made brands such as RCA, GE (General Electric), Sylvania, Raytheon, TungSol and PentaLabs , just to name a few. 5 We also carry european brands such as Amperex, Mullard, Telefunken and Marconi , just to name a few but in less quantities.

Hand-built by my neighbor, as a student in 1967 for his high school project. Red power indicator lights up and vacuum tubes glow but not tested with other components connected. Was told it has a 30 watt output.

ONE AMPLIFIER = 1 PIECE = 1PC = 1 AMPLIFIER MONO. 218 is a class AB1 tube amplifier with 12 watt output power obtained from 2 6V6 in phase counter. The amplifier is MONO. Made in Italy by Geloso Milano amplifier for Cinema Amplification System Hall.