Vintage Tube Amp

For sale is a Philco tube amplifier. The unit was plugged in and it did turn on. The red light on the front came on and both tubes were glowing. I have no idea if it works properly. Both tubes are sitting on a adapter that changes the socket to a 4 pin. The tubes look to in rough shape. The metal case has rust on it and will restored. Philco is stamped on the transformer. The amplifier was wired to be connected to the GONSET transceiver. It was used as a speaker amplifier. YOU WILL RECEIVE EVERYTHING AS SHOWN IN THE PICTURES. IF YOU HAVE ANY QUESTIONS, PLEASE FEEL FREE TO CALL ME. You will not be disappointed. My feedback speaks for itself. If you have problems with your order, PLEASE CONTACT ME BEFORE LEAVING FEEDBACK.

THIS COMES AS PICTURED AND UNTESTED. I BELIEVE IT IS A 2-CHANNEL POWER SUPPLY BUT THE PARTS IN IT ARE VERY NICE AND COULD BE USED IN AN AMPLIFIER BUILD.

THIS COMES AS PICTURED AND UNTESTED. I BELIEVE IT IS A 2-CHANNEL POWER SUPPLY BUT THE PARTS IN IT ARE VERY NICE AND COULD BE USED IN AN AMPLIFIER BUILD.

Vintage BELL & HOWELL 12 B&H Filmosound 185 Power Speaker Tube Amp Rare Clean. Has extension speaker cable. Original Jensen speaker 220117 date code seems to place it at 17th week of 1951. This amp has not been turned on or tested.

It is in excellent condition. I have replaced the stock power tube with a JJ 6v6 power tube for a smoother tone. This amp has two channels, clean and ultra, an effects loop, and an included foot switch that gives a gain boost. There are no defects with this unit and it has been packed very carefully. Comes with power cord.

Line isolated, “Universal” A-B-C Battery Eliminator / Power Supply for powering most vintage battery operated or farm tube radios. Selectable “A” (filament) Supply: “A6″ (6.0 -6.5V) or “Ax” (1.25-5.0V)- 2.5 Amp. “B” (plate) Supplies: +135V- 80mA, 90V – 60mA, 67.5V – 40mA, 45/22.5V – 5mA. “C” (grid) Supplies: -4.5/-9/ 22.5V – 2mA (“C” voltages easily user modified). “B” supply capability can be increased 20mA by reducing “A” current from 2.5A and/or by reducing ambient temperature to 25oC (from 35oC). “B” isolated from “A” and “C” supplies. Two LED indicators: one indicates power supply is ON, the other indicates radio is also ON and drawing plate current. For use as a universal bench supply OR to provide a permanent power source for battery powered tube radios. Small size (6.5 x 4 x 2.75) and light weight 28 oz. AC in: 85 – 265V, 50/60 Hz (USA plug type A). Operating temperature 0-35 deg C. Thermal overload and short circuit protected. Quiet (no fan, buzz or 60 cycle hum). Uses AC line and DC output common mode EMI filters. Includes User Manual and nine conductor cable for neat connection to radio (see photo). 3 Amp “A”, 100mA “B”, up to 270V “B” (using series connected eliminators) and/ or other A 1.25 – 10V adj. Serial number will differ from that shown in photos. Search separate listing under “Battery Consolidator / Voltage Converter” for item allowing mobile operation (single battery required) or as a battery eliminator (using available linear AC/DC converter) for many vintage tube radios.

Offered is a vintage homemade tube amplifier. Has some wear, see pictures. Please contact with any questions regarding item.

Vintage BELL & HOWELL 12 B&H Filmosound 185 Power Speaker Tube Amp Rare Clean. Has extension speaker cable. Original Jensen speaker 220117 date code seems to place it at 17th week of 1951. This amp has not been turned on or tested.

I believe it’s a tube amplifier. See all photos for condition and what’s all included.

THIS COMES AS PICTURED AND UNTESTED. I BELIEVE IT IS A 2-CHANNEL POWER SUPPLY BUT THE PARTS IN IT ARE VERY NICE AND COULD BE USED IN AN AMPLIFIER BUILD.