Vintage Tube Amp

Experience the natural-warm sound of the NAD 1020 Vintage Stereo HiFi Solid State Preamplifier. It is compatible with most all analog equipment and is perfect for vintage audio and video enthusiasts, who may not wish to go with a tube pre-amp. With its solid state design, the NAD 1020 provides clear audiophile sound quality to your amplifier and is a must-have. Get your hands on the NAD 1020 today and enjoy the rich history of Hi-Fi audio.

Filmosound open back 179 vintage style project. Empty unfinished open back pine head. Cabinet is 16” wide x 9” tall x 7-1/8. Chassis is not included. As a condition of this sale. The front control is removable. These are sample photos similar to the cabinet you will recieve. Please let me know how you will be finishing this cabinet so I can make the proper space allowances for vynal covering, piping and grill fabric, or a natural finish and so forth. Please note : This cabinet will need further sanding and prep work prior to a natural finish. The vintage tube amp you see in the photos is not included. Is made of 1/2” birch plywood and the control. Opening is 8-1/4″ wide x 1-3/4” and sets back 5/16″. I take a lot of pride in every cabinet I build as you will see when you receive the cabinet. I do not stock any cabinets and I make them as the order comes in. I have fabricated thousands of cabinet and sell them all over the world. I do not have all the big overhead that these big companys have, thus I pass the savings on to you. All the cabinets I build are fabricated in my shop, one at a time, out of 3/4 pine that I select and assembled using strong beautiful halfblind dovetail glued joinery. On this cabinet, the front panel is made of 1/2 baltic birch. I then router the exterior corners so you can easily install standard corner protectors if you so choice. Please note : will need more sanding and prep work prior to a natural finish. Please send me your inquire and I will try to answer it as best I can. Your cabinet will be packaged well and insured for your piece of mind. This item will be insured and packaged very well to make sure it arrives safely. I welcome any questions you may have to assist you on this cabinet. I will be more then glad to assist you in any way I can. It is not necessary to post negative feed back. Your satisfaction is very very important to me. All USA buyers must have a known address, not a PO box in the lower 48 states.

VINTAGE BOSE 1801 SOLID STATE DUAL CHANNEL POWER AMPLIFIER AMP Works. This is a vintage Bose 1801 power amplifier that works well. It has two channels and is a solid state unit. The model is 1801 and it is a unit type. The brand is Bose. This amplifier is perfect for any music enthusiast who wants to experience the vintage sound of the past. It falls under the categories of Vintage Amplifiers & Tube Amps, Vintage Audio & Video, Vintage Electronics, and Consumer Electronics. This power amplifier will definitely add a unique touch to any music collection.

DESCRIPTION Offered for sale is a little over 5-lbs of Vintage Cloth-Covered hook up wire. All removed from working 1950′s vacuum tube audio equipment. Some is stranded, some is solid. Includes both harnesses and individual pieces, all the individual wires are at least 6 long (or longer). Some of it might have a little dust, tape, tape residue, or kinda smell old (because it is). The total Net weight of the wire is 5.15 lbs (not including the box). The photos are of the ACTUAL wire you’ll receive. This item is in the category “Musical Instruments & Gear\Guitars & Basses\Parts & Accessories\Amplifier Parts”. The seller is “nardisamps” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Chile, Colombia, Costa Rica, Dominican Republic, Panama, Trinidad and Tobago, Guatemala, El Salvador, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Pakistan, Paraguay, Reunion, Uruguay.

• Country/Region of Manufacture: United States
• Type: Wire
• Brand: Unbranded

Vintage Zenith 7F30 Tube Amp from Working Console. Solid Unit With All Tubes. This item is in the category “Consumer Electronics\Vintage Electronics\Vintage Audio & Video\Vintage Amplifiers & Tube Amps”. The seller is “jsdavis802003″ and is located in this country: US. This item can be shipped to United States.

• Model: Zenith 7F31
• Brand: Zenith
• Type: Tube Amplifier

Filmosound open back 179 vintage style project. Empty unfinished open back pine head. Cabinet is 16” wide x 9” tall x 7-1/4”deep. Chassis is not included. The front control is removable. These are sample photos similar to the cabinet you will recieve. Please let me know how you will be finishing this cabinet so I can make the proper space allowances for vynal covering , piping and grill fabric , or a natural finish and so forth. Please note : This cabinet will need further sanding and prep work prior to a natural finish. The vintage tube amp you see in the photos is not included. Is made of 1/2” birch plywood and the control. Opening is 8-1/4″ wide x 1-3/4” and sets back 5/16″. I take a lot of pride in every cabinet I build as you will see when you receive the cabinet. I do not stock any cabinets and I make them as the order comes in. I have fabricated thousands of cabinet and sell them all over the world. I do not have all the big overhead that these big companys have , thus I pass the savings on to you. All the cabinets I build are fabricated in my shop , one at a time , out of 3/4 pine that I select and assembled using strong beautiful halfblind dovetail glued joinery. On this cabinet , the front panel is made of 1/2 baltic birch. I then router the exterior corners so you can easily install standard corner protectors if you so choice. Please note : will need more sanding and prep work prior to a natural finish. Please send me your inquire and I will try to answer it as best I can. Your cabinet will be packaged well and insured for your piece of mind. Please make your selection at check out. I welcome any questions you may have to assist you on this cabinet. I will be more then glad to assist you in any way I can. It is not necessary to post negative feed back. Your satisfaction is very very important to me. All USA buyers must have a known address, not a PO box in the lower 48 states. The item “Rawcabs Filmosound 179 Custom empty solid pine head cabinet for vintage tube amp” is in sale since Wednesday, June 17, 2020. This item is in the category “Musical Instruments & Gear\Guitars & Basses\Guitar Amplifiers”. The seller is “sorrycharly” and is located in Fresno, California. This item can be shipped to United States.

• Country of Manufacture: United States
• Type: Parts & Accessories
• Model: project D.I.Y. 179
• Country/Region of Manufacture: United States
• MPN: Does Not Apply
• Amplifier Type: Head
• Brand: rawcabs